Part Number
Definition:
A REPLACEABLE DEVICE DESIGNED TO REMOVE SOLID PARTICLES FROM FLUIDS RANGING IN DENSITY FROM HEAVY LIQUIDS TO GASES. THE REMOVAL OF PARTICLES IS ACCOMPLISHED BY POROUS MATERIAL (METALLIC OR NON-METALLIC), STACKED DISKS, WOUND WIRE, OR THE LIKE, CONSTRUCTED SO THE FLUID CAN FLOW THROUGH THE DEVICE WHILE THE SOLID PARTICLES ARE RETAINED. IT MAY BE DESIGNED TO FIT INTO A FILTER, FLUID (OR SIMILAR CAVITY), OR IT MAY HAVE AN INTEGRAL OUTER CASING AND MOUNTING FACILITIES AND BE DESIGNED TO CONNECT DIRECTLY TO AN ENGINE, COMPRESSOR, OR THE LIKE. THE DEGREE OF REMOVAL OF PARTICLES MUST BE NOMINALLY RATED AT LESS THAN 50 MICRONS OR ABSOLUTELY RATED AT LESS THAN 75 MICRONS. EXCLUDES FILTER ELEMENT, AIR CONDITIONING. SEE ALSO STRAINER ELEMENT, SEDIMENT.
CAGE Information
| Code | Company |
|---|---|
| 05228 | PTI TECHNOLOGIES INC. |
Federal Supply Class
Title
CENTRIFUGALS, SEPARATORS, AND PR
Inclusions:
Exclusions:
EXCLUDES LABORATORY CENTRIFUGES (FSG 65 AND 66); WATER PURIFICATION FILTERS (FSC 4610).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| APGF | DESIGN TYPE | NONREUSABLE |
| ADNH | FILTRATION RATING IN MICRONS | 25.0 NOMINAL |
| ADNK | FLOW DIRECTION | OUTSIDE IN |
| ADNP | DROP PRESSURE | NOT RATED |
| CXZX | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW |
| ADNQ | DIFFERENTIAL PRESSURE | NOT RATED |
| ABPM | BODY DIAMETER | 3.660 INCHES NOMINAL |
| MATT | MATERIAL | GLASS FIBER FILTERING MEDIUM |
| MATT | MATERIAL | RUBBER BUNA N SEAL |
| AZTL | BODY OVERALL LENGTH | 5.250 INCHES NOMINAL |
| AZKQ | TEMP RATING | NOT RATED |
| MATT | MATERIAL | STEEL BODY |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON |
| CRXW | FILTERING MEDIA DESIGN | LAYERED SINGLE FILTERING MEDIA RESPONSE |
| CQJX | NOMINAL THREAD SIZE | 1.000 INCHES |
| FEAT | SPECIAL FEATURES | FOR WATER REMOVAL |
| STYL | STYLE DESIGNATOR | CYLINDRICAL W/ INTEGRAL OUTER CASING |