Part Number
Part Number:
NSN:
NIIN:
Item Name:
HOSE ASSEMBLY , NONMETALLIC
Definition:
A LENGTH OF NONMETALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, NONMETALLIC. EXCLUDES HOSE ASSEMBLY, AIR DUCT; AND HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
CAGE Information
| Code | Company |
|---|---|
| 70434 | ANCHOR SWAN CORP SUB OF AMERACE CORP |
Federal Supply Class
Title
HOSE AND FLEXIBLE TUBING
Inclusions:
INCLUDES AIR DUCT, METALLIC, NONMETALLIC, AND TEXTILE FIBER HOSES AND THEIR ASSEMBLIES; FLEXIBLE TUBING AND THEIR ASSEMBLIES.
Exclusions:
EXCLUDES CONDUIT AND THEIR ASSEMBLIES (FSC 5975); LABORATORY TUBES (FSC 6640); MEDICAL AND SURGICAL TUBES (FSC 6515); RIGID TUBING AND THEIR ASSEMBLIES (FSC 4710).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABMH | RECESS DEPTH | 0.026 INCHES NOMINAL 1ST END |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| CRXX | MEASURING METHOD AND LENGTH | 215.000 INCHES NOMINAL WORKING |
| AKUT | END FLANGE CONSTRUCTION | SOLID 1ST END |
| CRFY | FLOW ANGLE | 90.0 DEGREES 1ST END |
| ABMD | RECESS DIAMETER | 1.125 INCHES NOMINAL 1ST END |
| CTCJ | FLANGE STYLE | ROUND W/ BOLT HOLES 1ST END |
| ABKV | OUTSIDE DIAMETER | 2.000 INCHES NOMINAL |
| ABKU | FLANGE THICKNESS | 0.310 INCHES MINIMUM 1ST END AND 0.320 INCHES MAXIMUM 1ST END |
| ABJH | TEMP RATING | -67.0 DEG FAHRENHEIT SINGLE RESPONSE AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQBG | FIRST END SWIVEL ACTION CAPABILITY | INCLUDED |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL |
| AHNC | CONNECTION STYLE | RECESSED W/GASKET GROOVE 1ST END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND MILDEW RESISTANT AND OIL RESISTANT |
| AWLS | CONNECTION TYPE | RECESSED FLANGE 1ST END |
| AKUU | END CONNECTION DESIGN | ELBOW 1ST END |
| CQHW | FIRST END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CADMIUM, QQ-P-416, TYPE 2, CLASS 3 |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| CQCS | LAYER COMPOSITION AND LOCATION | 2ND LAYER BRAIDED STEEL WIRE ERR-100 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 16.000 INCHES |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 0.0 |
| CQBD | BURST TEST PRESSURE | 2500.0 POUNDS PER SQUARE INCH |
| CQGM | MAXIMUM OPERATING PRESSURE | 625.0 POUNDS PER SQUARE INCH |
| ADLF | HOSE OR TUBING SPEC/STD DATA | MIL&H&13531 TYPE 2,CLASS A SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| AARX | INSIDE DIAMETER | 1.250 INCHES NOMINAL |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE ERR-100 |
| AEPR | FLANGE OUTSIDE DIAMETER | 1.990 INCHES MINIMUM 1ST END AND 2.010 INCHES MAXIMUM 1ST END |
| ADJM | INNER CONVEYING TUBE MATERIAL | RUBBER, SYNTHETIC |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, CHLOROPRENE ERR-100 |
| CRDW | HYDROSTATIC TEST PRESSURE | 1250.0 POUNDS PER SQUARE INCH |