Part Number
Part Number:
NSN:
NIIN:
Item Name:
SCREW ASSEMBLY , PANEL
Definition:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
CAGE Information
| Code | Company |
|---|---|
| 0HDW7 | HUCK INTERNATIONAL INC. DBA ALCOA FA |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| SFTT | SURFACE TREATMENT | OXIDE FASTENER |
| MATT | MATERIAL | STEEL COMP 304 STAND-OFF |
| SFTT | SURFACE TREATMENT | OXIDE PRIMARY WASHER |
| AGSM | MATERIAL ACCOMMODATED THICKNESS | 0.032 INCHES MINIMUM AND 0.063 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 302 SPRING |
| AASK | HEAD STYLE | KNURLED NO. 3 |
| MATT | MATERIAL | STEEL COMP 301 SECONDARY WASHER OR STEEL COMP 302 SECONDARY WASHER |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| AASL | HEAD DIAMETER | 0.365 INCHES NOMINAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| MATT | MATERIAL | STEEL COMP 302 FASTENER OR STEEL COMP 316 FASTENER OR STEEL COMP 304 FASTENER OR STEEL COMP 305 FASTENER OR STEEL COMP 384 FASTENER |
| SFTT | SURFACE TREATMENT | PASSIVATE SPRING |
| SFTT | SURFACE TREATMENT | OXIDE STAND-OFF |
| SFTT | SURFACE TREATMENT | OXIDE SECONDARY WASHER |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AAJD | THREAD CLASS | 2A |
| MATT | MATERIAL | STEEL COMP 305 PRIMARY WASHER OR STEEL COMP 304 PRIMARY WASHER OR STEEL COMP 316 PRIMARY WASHER OR STEEL COMP 384 PRIMARY WASHER |
| AASA | THREAD LENGTH | 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.422 INCHES MINIMUM AND 1.452 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AASU | HEAD HEIGHT | 0.133 INCHES NOMINAL |