Part Number
Part Number:
NSN:
NIIN:
Item Name:
MICROCIRCUIT , DIGITAL
Definition:
A MICROCIRCUIT SPECIFICALLY DESIGNED TO GENERATE, MODIFY, OR PROCESS ELECTRICAL SIGNALS WHICH OPERATE WITH TWO DISTINCT OR BINARY STATES. THESE STATES ARE COMMONLY REFERRED TO AS ON AND OFF, TRUE AND FALSE, HIGH AND LOW, OR "1" AND "0".
CAGE Information
| Code | Company |
|---|---|
| 24930 | ITT CORPORATION DBA ITT ELECTRONICS |
Federal Supply Class
Title
MICROCIRCUITS, ELECTRONIC
Inclusions:
INCLUDES INTEGRATED CIRCUIT DEVICES; INTEGRATED CIRCUIT MODULES, INTEGRATED ELECTRONIC DEVICES: HYBRID, MAGNETIC, MOLECULAR, OPTO-ELECTRONIC, AND THIN FILM.
Exclusions:
EXCLUDES SINGLE CIRCUIT ELEMENTS SUCH AS CAPACITORS; RESISTORS; DIODES AND TRANSISTORS; PRINTED CIRCUIT BOARDS AND CIRCUIT CARD ASSEMBLIES; AND FILTERS AND NETWORKS.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CQSZ | INCLOSURE CONFIGURATION | DUAL-IN-LINE |
| AFGA | OPERATING TEMP RANGE | -55.0/+125.0 DEG CELSIUS |
| ADAT | BODY WIDTH | 0.245 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| CTFT | CASE OUTLINE SOURCE AND DESIGNATOR | T0-116 JOINT ELECTRON DEVICE ENGINEERING COUNCIL |
| CQZP | INPUT CIRCUIT PATTERN | 9 INPUT |
| ADAQ | BODY LENGTH | 0.755 INCHES MINIMUM AND 0.785 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.140 INCHES MINIMUM AND 0.180 INCHES MAXIMUM |
| AEHX | MAXIMUM POWER DISSIPATION RATING | 475.0 MILLIWATTS |
| AFJQ | STORAGE TEMP RANGE | -65.0/+150.0 DEG CELSIUS |
| CRHL | BIT QUANTITY (NON-CORE) | 4 |
| CZEQ | TIME RATING PER CHACTERISTIC | 25.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT |
| TTQY | TERMINAL TYPE AND QUANTITY | 16 PRINTED CIRCUIT |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | 1.2 VOLTS MINIMUM POWER SOURCE AND 5.5 VOLTS MAXIMUM POWER SOURCE |
| CQSJ | INCLOSURE MATERIAL | CERAMIC AND GLASS |
| CSSL | DESIGN FUNCTION AND QUANTITY | 4 COUNTER, POSITIVE LOGIC AND 4 COUNTER, PRESETTABLE |
| CQWX | OUTPUT LOGIC FORM | TRANSISTOR-TRANSISTOR LOGIC |
| TEST | TEST DATA DOCUMENT | 24930-G390477 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| AGAV | END ITEM IDENTIFICATION | AN/SPS-48A(V) FCADT FSCM 24930 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| CBBL | FEATURES PROVIDED | MONOLITHIC |