Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHAFT , STRAIGHT
Definition:
A STRAIGHT SHAFT HAVING TWO OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE OF 1 TO 125 MICROINCHES (O.O25 TO 3.2 MICROMETERS), ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE (S), KEYWAY(S), SPLINES, THREADS, OR HOLES. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE DRILLED FOR LUBRICATING HOLES. FOR ITEMS HAVING AN INTEGRAL GEAR(S) OR WORM(S), SEE GEARSHAFT (AS MODIFIED). FOR ITEMS DESIGNED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), STRAIGHT. FOR ITEMS NOT HAVING THE ABOVE CONDITIONS SEE PIN, STRAIGHT, HEADLESS. FOR ITEMS HAVING MACHINED ENDS WHICH CONSTITUTE STEPS SEE SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; AND BOLT, FLUID PASSAGE.
CAGE Information
| Code |
Company |
| 23040 |
FORD MOTOR CO FORD PARTS AND SERVICE |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| AMFB |
FIRST END DISTANCE BETWEEN HOLE CENTERS |
0.875 INCHES NOMINAL |
| AMFZ |
SECOND END DIAMETER |
0.8730 INCHES NOMINAL |
| AAHN |
END SIMILARITY |
NOT IDENTICAL |
| CSYM |
SURFACE FINISH |
16.0 MICROINCHES |
| AAGZ |
FIRST END STYLE |
TWO CROSS DRILLED HOLES |
| AMFW |
SECOND END DISTANCE FROM KEYWAY CENTER TO END |
2.594 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH |
7.875 INCHES NOMINAL |
| AMHZ |
SECOND END ANGLE BETWEEN HOLES |
90.0 DEGREES NOMINAL |
| MATT |
MATERIAL |
STEEL |
| AMFR |
SECOND END KEYWAY WIDTH |
0.1560 INCHES NOMINAL |
| CWFJ |
FIRST END ANGLE BETWEEN HOLES |
90.0 DEGREES NOMINAL |
| AMFS |
SECOND END EXTERNAL KEYWAY LENGTH |
0.625 INCHES NOMINAL |
| AMDZ |
FIRST END DISTANCE FROM HOLE CENTER TO END |
0.186 INCHES NOMINAL |
| AAHP |
SECOND END STYLE |
TWO CROSS DRILLED HOLES AND WOODRUFF KEYWAY |
| AMDX |
FIRST END HOLE DIAMETER |
ANY ACCEPTABLE |
| AMDL |
FIRST END DIAMETER |
0.8750 INCHES NOMINAL |
| AMGS |
SECOND END HOLE DIAMETER |
ANY ACCEPTABLE |
| FEAT |
SPECIAL FEATURES |
2 PERPENDICULAR LUBRICATION HOLES,COUNTERSUNK 0.406 IN. BOTH ENDS |
Similar Parts