Part Number
Part Number:
NSN:
NIIN:
Item Name:
RIVET , BLIND
Definition:
AN ITEM CONSISTING OF TWO OR MORE OF THE FOLLOWING COMPONENTS: STEM, RIVET BODY, SLEEVE, EXPANDER, BOLT, AND COLLAR. IT IS A HEADED FASTENING DEVICE WITH THE SHANK DESIGNED TO BE EXPANDED BY MEANS OF A SEPARATE OR INTEGRAL STEM OR MANDREL, OR BOLT AND EXPANDER. IT IS DESIGNED TO BE INSTALLED OR EXPANDED FROM ONE SIDE ONLY. EXCLUDES NUT, BLIND ASSEMBLY.
CAGE Information
| Code | Company |
|---|---|
| 0HDW7 | HUCK INTERNATIONAL INC. DBA ALCOA FA |
Federal Supply Class
Title
RIVETS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABAF | EXPANSION DEVICE | SERRATED STEM-TYPE W |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE STEM |
| AASK | HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| AAZF | SHANK STYLE | SELF-PLUGGING MECHANICALLY LOCKED STEM |
| ANEE | GRIP LENGTH | 0.563 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |
| AAZG | HEAD MAJOR DIAMETER | 0.290 INCHES MAXIMUM |
| MATT | MATERIAL | ALUMINUM ALLOY 5056 SLEEVE |
| MATT | MATERIAL | STEEL COMP 8740 STEM |
| FEAT | SPECIAL FEATURES | NS" LETTERS AFTER THE MATERIAL CODE "B" INDICATE NO PREFERENCE TO LOCK TYPE (MAY BE VISIBLE OR INTERNAL). RIVETS WITH NO LETTER CODE (INDICATING VISIBLE LOCK TYPE) AND RIVETS WITH THE LETTER "H" AFTER THE MATERIAL CODE (INDICATING INTERNAL LOCK TYPE) ARE BOTH ACCEPTABLE FOR THIS ITEM OF SUPPLY. |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC ALL TREATMENT RESPONSES STEM |
| SFTT | SURFACE TREATMENT | CADMIUM STEM AND CHROMATE STEM |
| AAZE | SHANK DIAMETER | 0.156 INCHES MINIMUM AND 0.160 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | CHROMATE SLEEVE |
| AASB | FASTENER LENGTH | 0.720 INCHES MINIMUM AND 0.740 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE SLEEVE |