Part Number
Definition:
AN ITEM CONSISTING OF A CASING WITH FITTINGS AND ATTACHMENTS ON EACH END AND A SPIRALLY WOUND WIRE CORE WITH FORMED END(S) AND/OR CRIMPED ON END FITTINGS. IT IS DESIGNED TO TRANSMIT ROTARY MOTION AROUND BENDS FROM A MOTOR OR OTHER POWER SOURCE TO DRIVE VARIOUS TYPES OF EQUIPMENT, SUCH AS TACHOMETERS, SPEEDOMETERS, REMOTE CONTROLS, INSTRUMENTS, AND THE LIKE, WHICH ARE LOCATED AT AN ANGLE AND/OR DISTANCE FROM THE POWER SOURCE. SEE ALSO CONTROL ASSEMBLY, PUSH-PULL.
CAGE Information
| Code | Company |
|---|---|
| 40152 | VME AMERICAS INC SUB OF VME GROUP N |
Federal Supply Class
Title
LIQUID AND GAS FLOW, LIQUID LEVE
Inclusions:
INCLUDES LIQUID LEVEL FLOAT INSTRUMENTS; REVOLUTION COUNTERS; SPEEDOMETERS; ROTATION MEASURING INSTRUMENTS AND APPARATUS; OXYGEN FLOW INDICATORS; TACHOMETERS, INCLUDING ENGINE TACHOMETERS.
Exclusions:
EXCLUDES COMBINATION INSTRUMENTS; (FSC 6695); METEOROLOGICAL INSTRUMENTS (FSC 6660); AND AUTOMATIC CONTROL VALVES (FSG 48).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABHP | OVERALL LENGTH | 169.188 INCHES NOMINAL |
| APTD | END TYPE | ROUND KEYED FIRST END |
| CFQW | CROSS SECTION SIZE AND LOCATION | 0.150 INCHES FILTER HOUSING LEFT SIDE ANY ACCEPTABLE FIRST END AND 0.153 INCHES ONE WASHER SWAGED TO SLEEVE ANY ACCEPTABLE FIRST END |
| BJPS | CASING MATERIAL | RUBBER AND STEEL |
| CFRN | CASING SURFACE TREATMENT | ANY ACCEPTABLE |
| AECT | THREAD DEPTH | 0.375 INCHES NOMINAL SECOND END |
| AWZY | END CONNECTION TYPE | THREADED INTERNAL BOTH ENDS |
| ABUJ | THREAD SIZE (NON-CORE) | ERR-070 |
| APJC | THREAD LOCATION | INTERNAL BOTH ENDS |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNF SECOND END |
| CFSM | STRENGTH RATING CHARACTERISTICS (NON-CORE) | 15 LB TORSIONAL STRENGTH IN BOTH DIRECTIONS |
| AJXJ | CORE MATERIAL | STEEL |
| ASDB | WIDTH ACROSS FLATS | 1.000 INCHES NOMINAL FIRST END |
| CFRZ | CORE OVERALL LENGTH | 169.188 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNS FIRST END |
| AEDN | TIP LENGTH | 1.1018 INCHES MINIMUM FIRST END AND 1.022 INCHES MAXIMUM FIRST END |
| CFRX | OVERALL END SIZE | 0.875 IN. W SECOND END |
| FEAT | SPECIAL FEATURES | COUNTERCLOCKWISE CORE ROTATION DIRECTION |
| CFRT | SWIVEL END | NOT PROVIDED BOTH ENDS |
| ASDB | WIDTH ACROSS FLATS | 0.750 INCHES NOMINAL SECOND END |
| AAJD | THREAD CLASS | 2B BOTH ENDS |
| CFRQ | CASING OUTSIDE DIAMETER | 0.300 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| AECT | THREAD DEPTH | 0.327 INCHES NOMINAL FIRST END |
| CFRX | OVERALL END SIZE | 1.000 IN. W FIRST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND BOTH ENDS |
| AEDN | TIP LENGTH | 0.950 INCHES MINIMUM SECOND END AND 1.010 INCHES MAXIMUM SECOND END |
| CFQW | CROSS SECTION SIZE AND LOCATION | 0.101 INCHES BOTTOM HALF NOT APPLICABLE SECOND END AND 0.104 INCHES SIDE WAIST NOT APPLICABLE SECOND END |
| CFRR | CASING PROTECTIVE DEVICE TYPE | PLASTIC COVER OR RUBBER COVER |
| BDRL | SETSCREW | NOT INCLUDED BOTH ENDS |
| CFRY | LUBRICATION FITTING | NOT PROVIDED BOTH ENDS |
| CFSL | CORE REMOVABILITY | REMOVABLE |
| AGGZ | SHANK OUTSIDE DIAMETER | ANY ACCEPTABLE FIRST END |
| CGDN | MINIMUM OPERATING RADIUS | 5.000 INCHES |
| APTD | END TYPE | SQUARE MALE SECOND END |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE |
| BPPL | WRENCHING FACILITY TYPE | HEXAGON BOTH ENDS |
| AGGZ | SHANK OUTSIDE DIAMETER | ANY ACCEPTABLE SECOND END |
| AKMF | CORE SURFACE TREATMENT | ZINC COATED |
| AKMH | CORE DIAMETER | 0.150 INCHES NOMINAL |
| CFRP | CASING LENGTH BETWEEN FERRULES | 168.000 INCHES NOMINAL |