Part Number
Part Number:
NSN:
NIIN:
Item Name:
MICROCIRCUIT , LINEAR
Definition:
A MICROCIRCUIT WHOSE OUTPUT IS A FUNCTION OF THE INPUT; THAT IS, THE OUTPUT VARIES IN A PREDETERMINED AND ESSENTIALLY PREDICTABLE MANNER FROM THE INPUT SIGNAL.
CAGE Information
| Code | Company |
|---|---|
| 34371 | INTERSIL CORPORATION |
Federal Supply Class
Title
MICROCIRCUITS, ELECTRONIC
Inclusions:
INCLUDES INTEGRATED CIRCUIT DEVICES; INTEGRATED CIRCUIT MODULES, INTEGRATED ELECTRONIC DEVICES: HYBRID, MAGNETIC, MOLECULAR, OPTO-ELECTRONIC, AND THIN FILM.
Exclusions:
EXCLUDES SINGLE CIRCUIT ELEMENTS SUCH AS CAPACITORS; RESISTORS; DIODES AND TRANSISTORS; PRINTED CIRCUIT BOARDS AND CIRCUIT CARD ASSEMBLIES; AND FILTERS AND NETWORKS.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CQSZ | INCLOSURE CONFIGURATION | DUAL-IN-LINE |
| AFGA | OPERATING TEMP RANGE | -55.0/+125.0 DEG CELSIUS |
| PMLC | PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACES GOLD |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | 15.0 VOLTS MAXIMUM POWER SOURCE |
| PRMT | PRECIOUS MATERIAL | GOLD |
| TTQY | TERMINAL TYPE AND QUANTITY | 28 PRINTED CIRCUIT |
| CWSG | TERMINAL SURFACE TREATMENT | GOLD |
| ADAU | BODY HEIGHT | 0.115 INCHES MAXIMUM |
| CBBL | FEATURES PROVIDED | NEGATIVE OUTPUTS AND POSITIVE OUTPUTS AND W/ENABLE AND W/BUFFERED OUTPUT AND HERMETICALLY SEALED AND W/DECODED OUTPUT |
| ADAQ | BODY LENGTH | 1.395 INCHES MINIMUM AND 1.405 INCHES MAXIMUM |
| AFJQ | STORAGE TEMP RANGE | -65.0/+150.0 DEG CELSIUS |
| CSSL | DESIGN FUNCTION AND QUANTITY | 1 MULTIPLEXER, ANALOG |
| CQZP | INPUT CIRCUIT PATTERN | 16 CHANNEL |
| ADAT | BODY WIDTH | 0.530 INCHES MINIMUM AND 0.540 INCHES MAXIMUM |
| CZEQ | TIME RATING PER CHACTERISTIC | 300.00 NANOSECONDS NOMINAL PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT |
| CQSJ | INCLOSURE MATERIAL | CERAMIC AND GLASS |
| AEHX | MAXIMUM POWER DISSIPATION RATING | 1200.0 MILLIWATTS |
| TEST | TEST DATA DOCUMENT | 35351-157000 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| AGAV | END ITEM IDENTIFICATION | AN/ASN-124 FSCM 35351 |