Part Number
Part Number:
NSN:
NIIN:
Item Name:
WASHER , FLAT
Definition:
A WASHER HAVING A CENTRALLY LOCATED HOLE WITH A SOLID OR LAMINATED CROSS-SECTION AND TWO FLAT PARALLEL BEARING SURFACES. THE HOLE MUST BE 75 PERCENT OR LESS THAN THE LARGEST DIMENSION AND THE BEARING SURFACE FINISH IS GREATER THAN 32 MICROINCH (0.8 MICROMETER). THE THICKNESS CANNOT EXCEED 25 PERCENT OF THE LARGEST OUTSIDE DIMENSION. WHEN THE LARGEST OUTSIDE DIMENSION IS LESS THAN 1/4 INCH OR 6MM, THE THICKNESS MUST BE 0.006 INCHES (0.15MM) OR GREATER AND FOR ITEMS 1/4 INCH (6MM) OR LARGER, THE THICKNESS MUST BE 0.016 INCHES (0.4MM) OR GREATER. THE MAXIMUM TOLERANCE IS APPLIED TO DIMENSIONS AND USED AS A DETERMINING FACTOR. ITEMS WITH SEPARABLE LAMINATION USE SHIM. FOR ITEMS FABRICATED FROM CERAMIC OR ELECTRICALLY RATED MATERIALS BY SPECIFICATION OR INDUSTRY STANDARDS USE INSULATOR (1), WASHER. EXCLUDES DISK, VALVE, GRAPHITE IMPREGNATED AND LUBRICATED ITEMS.
CAGE Information
| Code |
Company |
| 1DC28 |
HELICOPTER PARTS SERVICE INC |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| ABNM |
THICKNESS |
0.063 INCHES NOMINAL |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
RECTANGULAR |
| ADAV |
OVERALL DIAMETER |
0.750 INCHES MINIMUM AND 0.770 INCHES MAXIMUM |
| ABMX |
CENTER HOLE SHAPE STYLE |
ROUND |
| AAUB |
HOLE DIAMETER |
0.330 INCHES MINIMUM AND 0.350 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-7952 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL OR QQ-S-636,CANCELED FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ABMW |
PERIPHERAL SHAPE STYLE |
ROUND |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
Similar Parts