Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE UNTHREADED PORTION IS OF A SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN-THOUSANDTHS (0.0015) OF AN INCH (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER, NOR IS IT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. FOR ITEMS HAVING CLOSE TOLERANCE, AND FABRICATED FROM MATERIAL HAVING 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH, SEE BOLT, SHEAR. FOR ITEMS FABRICATED FROM MATERIAL HAVING LESS THAN 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH AND NOT HAVING A CLOSE TOLERANCE, SEE BOLT, MACHINE.
CAGE Information
| Code | Company |
|---|---|
| 02731 | MCDONNELL DOUGLAS HELICOPTER CO INC |
Federal Supply Class
Title
BOLTS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 24 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-6887,TY2,CL2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAJD | THREAD CLASS | 3A |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, DOUBLE HEXAGON, TENSION, 280,000 PSI MINIMUM TENSTILE STRENGTH, 450 DEGRESS F |
| ANEE | GRIP LENGTH | 1.313 INCHES NOMINAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CQBC | MINIMUM TENSILE STRENGTH | 280000 POUNDS PER SQUARE INCH |
| AASA | THREAD LENGTH | 1.000 INCHES NOMINAL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5514 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS6532 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AATB | WIDTH BETWEEN FLATS | 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 305 OVERALL |
| AHYM | NOMINAL THREAD DIAMETER | 0.375 INCHES |
| AASK | HEAD STYLE | DOUBLE HEXAGON |
| AAUR | GRIP DIAMETER | 0.349 INCHES MINIMUM AND 0.363 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | VACUUM CADMIUM PLATED;HEAT TREAT 280,000 PSI MINIMUM ULTIMATE TENSTILE STRENGTH, RC52 MINIMUM FOR MARAGING, RC53 MINIMUM FOR AERMET;MAGNETIC PARTICLE INSPECT 100 PERCENT PER ASTM E 1444;UNDRILLED HEAD;HEAD OF BOLT TO BE FORGED;THREAD SHALL BE ROLLED AFTER HEAT TREATMENT;FATIGUE, MINIMUM TENSION-TENSION FATIGUE LOADS, HIGH LOADS EQUALS 11,800 LBS, LOW LOAD EQUALS 1,180 LBS;HIGH FATIGUE STRENGTH BASED ON 48PERCENT OF MIN. TENSTILE STRENGTH AND 10 PERCENT OF HIGH TENSTILE STRENGTH |
| AASU | HEAD HEIGHT | 0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| AASB | FASTENER LENGTH | 2.312 INCHES NOMINAL |