Part Number
Definition:
A SCREW, MACHINE OR SCREW, CAP, SOCKET HEAD WHOSE UNTHREADED PORTION IS OF SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001 IN.) (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS (1.000 IN.) (25 MM) OR LESS IN DIAMETER. ITEMS OVER (1.000 IN.) (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN THOUSANDTHS (0.0015 IN.) (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001 IN.) (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER. IT IS NOT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS.
CAGE Information
Code | Company |
---|---|
06725 | SPS TECHNOLOGIES LLC DBA AIR INDUSTR |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
MRC | Requirements Statement | Clear Text Reply |
---|---|---|
CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
SFTT | SURFACE TREATMENT | ALUMINUM OVERALL AND CHROMATE OVERALL |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-83488,TYPE2,CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNJF |
FEAT | SPECIAL FEATURES | FURNISHED WITH ONE O-RING |
AAJD | THREAD CLASS | 3A |
AASB | FASTENER LENGTH | 0.953 INCHES MINIMUM AND 0.983 INCHES MAXIMUM |
AAJF | THREAD DIRECTION | RIGHT-HAND |
CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
AASL | HEAD DIAMETER | 0.376 INCHES MINIMUM AND 0.381 INCHES MAXIMUM |
AASU | HEAD HEIGHT | 0.044 INCHES MINIMUM AND 0.046 INCHES MAXIMUM |
AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
ANEE | GRIP LENGTH | 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM |
ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
AASK | HEAD STYLE | FLAT COUNTERSUNK UNDERCUT |
AASA | THREAD LENGTH | 0.381 INCHES MINIMUM AND 0.481 INCHES MAXIMUM |
CMLP | THREAD QUANTITY PER INCH | 32 |