Part Number
Definition:
A STRAIGHT SHAFT HAVING TWO OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE OF 1 TO 125 MICROINCHES (O.O25 TO 3.2 MICROMETERS), ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE (S), KEYWAY(S), SPLINES, THREADS, OR HOLES. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE DRILLED FOR LUBRICATING HOLES. FOR ITEMS HAVING AN INTEGRAL GEAR(S) OR WORM(S), SEE GEARSHAFT (AS MODIFIED). FOR ITEMS DESIGNED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), STRAIGHT. FOR ITEMS NOT HAVING THE ABOVE CONDITIONS SEE PIN, STRAIGHT, HEADLESS. FOR ITEMS HAVING MACHINED ENDS WHICH CONSTITUTE STEPS SEE SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; AND BOLT, FLUID PASSAGE.
CAGE Information
| Code | Company |
|---|---|
| 80837 | KYSOR/WESTRAN CORP AUSTIN TRAILER DI |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMEB | FIRST END HOLE DEPTH | 1.000 INCHES NOMINAL |
| AMDX | FIRST END HOLE DIAMETER | 0.2500 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | WOODRUFF KEYWAY AND CROSS DRILLED |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMDL | FIRST END DIAMETER | 1.0000 INCHES NOMINAL |
| AMDE | FIRST END EXTERNAL KEYWAY LENGTH | 0.250 INCHES NOMINAL |
| AMDH | FIRST END DISTANCE FROM KEYWAY CENTER TO END | 1.500 INCHES NOMINAL |
| AMHD | SECOND END HOLE DEPTH | 1.000 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | 1ST DRILLED HOLE ON 2ND 0.390 IN. DIA |
| AMCZ | FIRST END KEYWAY WIDTH | 0.2500 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 10.500 INCHES NOMINAL |
| AMHZ | SECOND END ANGLE BETWEEN HOLES | 180.0 DEGREES NOMINAL |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.500 INCHES NOMINAL |
| AMDZ | FIRST END DISTANCE FROM HOLE CENTER TO END | 2.000 INCHES NOMINAL |
| AAHP | SECOND END STYLE | TWO CROSS DRILLED HOLES |
| AMGS | SECOND END HOLE DIAMETER | 0.3750 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 1.0000 INCHES NOMINAL |
| AMHS | SECOND END DISTANCE BETWEEN HOLE CENTERS | 3.781 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | STEEL COMP 1015 OR STEEL COMP 1025 |