Part Number
Part Number:
NSN:
NIIN:
Item Name:
HOSE ASSEMBLY , NONMETALLIC
Definition:
A LENGTH OF NONMETALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, NONMETALLIC. EXCLUDES HOSE ASSEMBLY, AIR DUCT; AND HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
CAGE Information
| Code | Company |
|---|---|
| 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC |
Federal Supply Class
Title
HOSE AND FLEXIBLE TUBING
Inclusions:
INCLUDES AIR DUCT, METALLIC, NONMETALLIC, AND TEXTILE FIBER HOSES AND THEIR ASSEMBLIES; FLEXIBLE TUBING AND THEIR ASSEMBLIES.
Exclusions:
EXCLUDES CONDUIT AND THEIR ASSEMBLIES (FSC 5975); LABORATORY TUBES (FSC 6640); MEDICAL AND SURGICAL TUBES (FSC 6515); RIGID TUBING AND THEIR ASSEMBLIES (FSC 4710).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| CRDW | HYDROSTATIC TEST PRESSURE | 5500.0 POUNDS PER SQUARE INCH |
| ABKV | OUTSIDE DIAMETER | 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | NPTF 2ND END |
| CQGM | MAXIMUM OPERATING PRESSURE | 2750.0 POUNDS PER SQUARE INCH |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT SINGLE RESPONSE AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQHW | FIRST END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CADMIUM OR COMPLETE FITTING ZINC |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| AWLS | CONNECTION TYPE | THREADED EXTERNAL PIPE 2ND END |
| CQJX | NOMINAL THREAD SIZE | 0.500 INCHES 1ST END |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 4.000 INCHES |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL |
| CQJX | NOMINAL THREAD SIZE | 0.250 INCHES 2ND END |
| AHNC | CONNECTION STYLE | INVERTED FLARE 2ND END |
| ADLG | FIRST END FITTING SPEC/STD DATA | SAE J516,FIG. 4A OR 4B,TABLE 4A,THD SIZE -5 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, SYNTHETIC ERR-100 |
| CRBL | SECOND END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL |
| CQBG | FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END |
| ADLH | SECOND END FITTING SPEC/STD DATA | SAE J516,FIG. 1A OR 1B,TALBE 1A,THD SIZE -4 FOR HOSE SIZE -4 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| ADLF | HOSE OR TUBING SPEC/STD DATA | SAE J517,100R1,TYPE 1,SIZE -4 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CQBD | BURST TEST PRESSURE | 11000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED WIRE ERR-100 |
| AARX | INSIDE DIAMETER | 0.250 INCHES NOMINAL |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND ABRASION RESISTANT AND WEATHERPROOF |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 2ND END |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE AND HYDRAULIC FLUID, WATER BASE SINGLE RESPONSE |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| CRZY | SECOND END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| ADJM | INNER CONVEYING TUBE MATERIAL | RUBBER, SYNTHETIC |
| CQRB | SEAT ANGLE | 30.0 DEGREES 2ND END |
| AAJD | THREAD CLASS | 2B 1ST END |
| CRLL | SECOND END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CADMIUM OR COMPLETE FITTING ZINC |
| CRXX | MEASURING METHOD AND LENGTH | 21.000 INCHES NOMINAL OVERALL |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |