Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHAFT , AXLE , AUTOMOTIVE
Definition:
A SHAFT WHICH IS A COMPONENT OF AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, USED TO TRANSMIT ROTARY MOTION FROM THE DIFFERENTIAL ASSEMBLY EITHER DIRECTLY OR INDIRECTLY TO THE WHEEL HUBS. EXCLUDES SHAFTS WITH A UNIVERSAL JOINT OR A COMPONENT OF A UNIVERSAL JOINT ATTACHED TO IT.
CAGE Information
| Code | Company |
|---|---|
| 13038 | CON-VEL INC. |
Federal Supply Class
Title
VEHICULAR POWER TRANSMISSION COM
Inclusions:
INCLUDES TRANSFER TRANSMISSION ASSEMBLIES; CLUTCH ASSEMBLIES; UNIVERSAL JOINTS; PROPELLER SHAFTS; AUTOMOTIVE TORQUE CONVERTERS; POWER TAKEOFFS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMDM | FIRST END SPLINE LENGTH | 2.719 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 34.688 INCHES NOMINAL |
| BBCD | FIRST END SPLINE QUANTITY | 16 |
| BNPJ | FIRST END FACILITY DIAMETER | 1.695 INCHES MINIMUM AND 1.700 INCHES MAXIMUM |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 1.949 INCHES MINIMUM AND 1.961 INCHES MAXIMUM |
| BNTF | FIRST END BEARING SEAT | INCLUDED |
| AMDN | FIRST END SPLINE MINOR DIAMETER | 1.949 INCHES MINIMUM AND 1.961 INCHES MAXIMUM |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 2.122 INCHES MINIMUM AND 2.127 INCHES MAXIMUM |
| AMQF | SECOND END TYPE | SPLINED |
| BNYX | FIRST END SPLINE TYPE | STRAIGHT |
| BNTD | FIRST END FACILITY LOCATION | 0.375 IN. FROM SHAFT END |
| AMEP | FIRST END DISTANCE FROM BEARING SEAT TO END | 4.985 INCHES MINIMUM AND 4.995 INCHES MAXIMUM |
| AMQA | FIRST END TYPE | SPLINED |
| BNTT | SECOND END BEARING SEAT | NOT INCLUDED |
| MATL | MATERIAL | STEEL, SAE 4150H |
| BBCF | SECOND END SPLINE QUANTITY | 16 |
| BNTG | FIRST END BEARING SEAT WIDTH | 0.942 INCHES MINIMUM AND 0.952 INCHES MAXIMUM |
| AMEL | FIRST END BEARING SEAT DIAMETER | 2.125 INCHES MINIMUM AND 2.127 INCHES MAXIMUM |
| BNTM | SECOND END SPLINE TYPE | STRAIGHT |
| AMGA | SECOND END SPLINE LENGTH | 2.000 INCHES NOMINAL |
| BNTC | FIRST END FACILITY WIDTH | 0.156 INCHES NOMINAL |
| BNTB | FIRST END ENGAGING/LOCKING/POSITIONING FACILITY | LOCKING DEVICE GROOVE |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 2.122 INCHES MINIMUM AND 2.127 INCHES MAXIMUM |
| AETC | METALLIC HARDNESS RATING | 39.0 MINIMUM ROCKWELL C AND 43.0 MAXIMUM ROCKWELL C |