Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
Code | Company |
---|---|
58905 | STRIKE WEAPONS AND UNMANNED AVIATION |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
MRC | Requirements Statement | Clear Text Reply |
---|---|---|
ATPC | STEP QUANTITY | 6 |
AAHN | END SIMILARITY | NOT IDENTICAL |
AMHA | SECOND END EXTERNAL THREAD LENGTH | 0.6850 INCHES NOMINAL |
AMDL | FIRST END DIAMETER | 1.0000 INCHES NOMINAL |
AMHD | SECOND END HOLE DEPTH | 0.5000 INCHES NOMINAL |
CSYM | SURFACE FINISH | 125.0 MICROINCHES |
AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.3742 INCHES NOMINAL |
AMGS | SECOND END HOLE DIAMETER | 0.1090 INCHES NOMINAL |
AAGZ | FIRST END STYLE | EXTERNAL THREADED |
MATT | MATERIAL | STEEL CORROSION RESISTING |
AAHP | SECOND END STYLE | CROSS DRILLED AND EXTERNALLY THREADED |
AMEA | FIRST END EXTERNAL THREAD LENGTH | 1.125 INCHES NOMINAL |
CSPY | LARGEST STEP DIAMETER | 1.250 INCHES NOMINAL |
AMFZ | SECOND END DIAMETER | 0.5000 INCHES NOMINAL |
ABHP | OVERALL LENGTH | 1.250 INCHES NOMINAL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CL 304,COND A FED SPEC SINGLE MATERIAL RESPONSE |