Part Number
Definition:
A WASHER HAVING A CENTRALLY LOCATED HOLE WITH A SOLID OR LAMINATED CROSS-SECTION AND TWO FLAT PARALLEL BEARING SURFACES. THE HOLE MUST BE 75 PERCENT OR LESS THAN THE LARGEST DIMENSION AND THE BEARING SURFACE FINISH IS GREATER THAN 32 MICROINCH (0.8 MICROMETER). THE THICKNESS CANNOT EXCEED 25 PERCENT OF THE LARGEST OUTSIDE DIMENSION. WHEN THE LARGEST OUTSIDE DIMENSION IS LESS THAN 1/4 INCH OR 6MM, THE THICKNESS MUST BE 0.006 INCHES (0.15MM) OR GREATER AND FOR ITEMS 1/4 INCH (6MM) OR LARGER, THE THICKNESS MUST BE 0.016 INCHES (0.4MM) OR GREATER. THE MAXIMUM TOLERANCE IS APPLIED TO DIMENSIONS AND USED AS A DETERMINING FACTOR. ITEMS WITH SEPARABLE LAMINATION USE SHIM. FOR ITEMS FABRICATED FROM CERAMIC OR ELECTRICALLY RATED MATERIALS BY SPECIFICATION OR INDUSTRY STANDARDS USE INSULATOR (1), WASHER. EXCLUDES DISK, VALVE, GRAPHITE IMPREGNATED AND LUBRICATED ITEMS.
CAGE Information
Code | Company |
---|---|
29215 | JENNY PRODUCTS INC. |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
MRC | Requirements Statement | Clear Text Reply |
---|---|---|
ZZZT | NONDEFINITIVE SPEC/STD DATA | A TYPE |
ZZZT | NONDEFINITIVE SPEC/STD DATA | A TYPE |
SFTT | SURFACE TREATMENT | CADMIUM OVERALL OR ZINC OVERALL |
AAGR | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A108 ASSN STD ALL MATERIAL RESPONSES OVERALL |
ABMX | CENTER HOLE SHAPE STYLE | ROUND |
ADAV | OVERALL DIAMETER | 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM |
MATT | MATERIAL | STEEL COMP 1010 OVERALL OR STEEL COMP 1019 OVERALL OR STEEL COMP 1016 OVERALL OR STEEL COMP 1015 OVERALL OR STEEL COMP 1018 OVERALL OR STEEL COMP 1020 OVERALL |
ABMW | PERIPHERAL SHAPE STYLE | ROUND |
ZZZW | DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY SURFACE TREATMENT |
AAUB | HOLE DIAMETER | 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM |
ABNM | THICKNESS | 0.086 INCHES MINIMUM AND 0.132 INCHES MAXIMUM |