Part Number
Part Number:
NSN:
NIIN:
Item Name:
RESISTOR , VARIABLE , NONWIRE WOUND ,
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OR MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code |
Company |
| 01121 |
ROCKWELL AUTOMATION INC. |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| TTQY |
TERMINAL TYPE AND QUANTITY |
6 TAB, SOLDER LUG |
| TTQY |
TERMINAL TYPE AND QUANTITY |
6 TAB, SOLDER LUG |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
100.000 PERCENT, RATED AMPERES C AND BETTER INDUSTRIAL CLEARS |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNEF |
| AAPN |
SECTION QUANTITY |
2 |
| AEDX |
SHAFT STYLE |
ROUND, UNDERCUT |
| AEDQ |
UNDERCUT DIAMETER |
0.240 INCHES NOMINAL |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| ABXF |
SHAFT LENGTH |
0.875 INCHES NOMINAL |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 1ST SECTION |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
2.0 FREE AIR SINGLE SECTION |
| AGQL |
UNDERCUT LENGTH |
0.125 INCHES NOMINAL |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
100.000 PERCENT, RATED AMPERES C AND BETTER FINISH |
| AEFP |
NONTURN DEVICE RADIUS |
0.531 INCHES NOMINAL |
| AXGY |
MOUNTING METHOD |
STANDARD BUSHING |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A SINGLE SECTION |
| AEFN |
NONTURN DEVICE LOCATION |
AT 3 OCLOCK AND AT 9 OCLOCK |
| ABWV |
SHAFT DIAMETER |
0.250 INCHES NOMINAL |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 2ND SECTION |
| AJYN |
SCREW THREAD DIAMETER |
0.375 INCHES NOMINAL |
Similar Parts