Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 07639 | GE AVIATION SYSTEMS LLC DBA GE AVIAT |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ATPC | STEP QUANTITY | 6 |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| BDSR | SECOND END SPLINE QUANTITY | 16 |
| ABHP | OVERALL LENGTH | 15.562 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.1880 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | SHAFT END FIRST STYLE HAS CROSS DRILLED HOLE 0.078 IN. DIA |
| AMEA | FIRST END EXTERNAL THREAD LENGTH | 0.688 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 0.8640 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | EXTERNAL THREADED |
| AAHP | SECOND END STYLE | SPLINED (INVOLUTE) |
| AMGA | SECOND END SPLINE LENGTH | 1.219 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 0.864 INCHES NOMINAL |