Part Number
Part Number:
NSN:
NIIN:
Item Name:
HOSE ASSEMBLY , NONMETALLIC
Definition:
A LENGTH OF NONMETALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, NONMETALLIC. EXCLUDES HOSE ASSEMBLY, AIR DUCT; AND HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
CAGE Information
| Code | Company |
|---|---|
| 98441 | PARKER-HANNIFIN CORPORATION DBA STRA |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| ADLF | HOSE OR TUBING SPEC/STD DATA | MIL-H-13531 TYPE 2,CLASS A SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| AARX | INSIDE DIAMETER | 0.500 INCHES NOMINAL |
| CQBD | BURST TEST PRESSURE | 14000.0 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 0.500 INCHES 1ST END |
| ABJH | TEMP RATING | -67.0 DEG FAHRENHEIT SINGLE RESPONSE AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AHNC | CONNECTION STYLE | INVERTED FLARE 1ST END |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL |
| CQBG | FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| CQGM | MAXIMUM OPERATING PRESSURE | 3500.0 POUNDS PER SQUARE INCH |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND MILDEW RESISTANT AND OIL RESISTANT |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| CMLP | THREAD QUANTITY PER INCH | 14 1ST END |
| CQHW | FIRST END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CADMIUM, QQ-P-416, TYPE 2, CLASS 3 |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| AWLS | CONNECTION TYPE | THREADED EXTERNAL PIPE 1ST END |
| CQCS | LAYER COMPOSITION AND LOCATION | 2ND LAYER BRAIDED STEEL WIRE ERR-100 |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END |
| CQRB | SEAT ANGLE | 30.0 DEGREES 1ST END |
| ABKV | OUTSIDE DIAMETER | 0.969 INCHES NOMINAL |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE ERR-100 |
| CRDW | HYDROSTATIC TEST PRESSURE | 7000.0 POUNDS PER SQUARE INCH |
| ADJM | INNER CONVEYING TUBE MATERIAL | RUBBER, SYNTHETIC |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, CHLOROPRENE ERR-100 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 7.000 INCHES |
| CRXX | MEASURING METHOD AND LENGTH | 16.500 INCHES NOMINAL OVERALL |