Part Number
Part Number:
NSN:
NIIN:
Item Name:
BEAM , STRUCTURAL
Definition:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.
CAGE Information
| Code | Company |
|---|---|
| 81755 | LOCKHEED MARTIN CORPORATION DBA LOCK |
Federal Supply Class
Title
STRUCTURAL SHAPES, NONFERROUS BA
Inclusions:
INCLUDES ANGLES; CHANNELS; TEES; ZEES.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| HEAT | HEAT TREATMENT | O-ANNEALED |
| ABRY | LENGTH | 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM |
| AARN | FABRICATION METHOD | EXTRUDED |
| BRFD | WEIGHT PER UNIT MEASURE | 0.476 POUNDS PER LINEAR FOOT |
| BPXK | FILLET RADIUS WHERE BOTTOM LEFT FLANGE JOINS WEB FLANGE/LEG | 0.125 INCHES NOMINAL |
| CTBR | LEFT BOTTOM INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| MATL | MATERIAL | ALUMINUM ALLOY AMS-QQ-A-200/3, ALLOY 2024 |
| CSMZ | LEFT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| ADXR | LEFT SIDE TOP FLANGE THICKNESS | 0.125 INCHES NOMINAL |
| BMPR | LEFT SIDE BOTTOM FLANGE THICKNESS | 0.125 INCHES NOMINAL |
| BMPQ | RIGHT SIDE BOTTOM FLANGE THICKNESS | 0.125 INCHES NOMINAL |
| CRZC | RIGHT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| BPXD | LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 0.300 INCHES NOMINAL |
| BQJH | BOTTOM FLANGE WIDTH | 1.425 INCHES NOMINAL |
| ABKW | OVERALL HEIGHT | 1.300 INCHES NOMINAL |
| BPXH | RIGHT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 0.7125 INCHES NOMINAL |
| CNQN | FOURTH TIP RELATIONSHIP TO PRECEDING TIPS | IDENTICAL W/FIRST TIP |
| CNQL | THIRD TIP RELATIONSHIP TO PRECEDING TIPS | IDENTICAL W/FIRST TIP |
| ZZZK | SPECIFICATION/STANDARD DATA | 81755-K30 MANUFACTURERS STANDARD |
| BPXM | FILLET RADIUS WHERE BOTTOM RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.125 INCHES NOMINAL |
| CWKK | RIGHT BOTTOM INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| BPXL | FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.125 INCHES NOMINAL |
| BPXJ | FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG | 0.125 INCHES NOMINAL |
| BPXF | LEFT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 0.7125 INCHES NOMINAL |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 0 TEMPER |
| AGTA | BASIC SHAPE STYLE | I SHAPE |
| BPXN | WEB FLANGE THICKNESS | 0.125 INCHES NOMINAL |
| CNQJ | SECOND TIP RELATIONSHIP TO FIRST TIP | IDENTICAL |
| BPXG | RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 0.300 INCHES NOMINAL |
| CMZY | FIRST TIP STYLE | SQUARE END |
| BQJG | TOP FLANGE WIDTH | 0.600 INCHES NOMINAL |
| ADXS | RIGHT SIDE TOP FLANGE THICKNESS | 0.125 INCHES NOMINAL |