Part Number
Definition:
A REPLACEABLE DEVICE DESIGNED TO REMOVE SOLID PARTICLES FROM FLOWING LIQUIDS. THE REMOVAL OF PARTICLES IS ACCOMPLISHED BY POROUS MATERIAL (METALLIC OR NON-METALLIC), WIRE MESH, PERFORATED METAL, OR THE LIKE, CONSTRUCTED SO THE LIQUID CAN FLOW THROUGH THE DEVICE WHILE THE SOLID PARTICLES ARE RETAINED. IT IS DESIGNED TO FIT INTO A STRAINER, SEDIMENT (OR SIMILAR CAVITY). IT MAY HAVE A REINFORCEMENT TO PREVENT COLLAPSING, DISTORTING OR RUPTURING. THE DEGREE OF PARTICLES REMOVED MUST BE NOMINALLY RATED AT 50 MICRONS, OR MORE, OR ABSOLUTELY RATED AT 75 MICRONS, OR MORE. SEE ALSO FILTER ELEMENT, FLUID.
CAGE Information
| Code | Company |
|---|---|
| 18954 | KORODY-COLYER CORP A CR INDUSTRIES C |
Federal Supply Class
Title
HOSE, PIPE, TUBE, LUBRICATION, A
Inclusions:
INCLUDES ADAPTERS; BENDS; CAPS; CLAMPS; CONNECTORS; COUPLINGS; CROSSES; ELBOWS; EXPANSION JOINTS; FERRULES; FLANGES; LATERALS; LUBRICATION FITTINGS; MANIFOLDS; NIPPLES; NOZZLES; OUTLETS; PLUGS; REDUCERS; SWING AND SWIVEL JOINTS; TEES; TRAPS; UNIONS; WYES.
Exclusions:
EXCLUDES AIR CONDITIONING-HEATING FITTINGS (FSC 4520); BITUMINIZED FIBER AND CONCRETE FITTINGS (FSC 5630); CONDUIT BOXES AND FITTINGS (FSC 5975); DOWNSPOUT FITTINGS (FSC 5670); MEDICAL AND SURGICAL FITTINGS (FSC 6515); LABORATORY FITTINGS (FSC 6640); POST CAPS AND RAIL ENDS (FSC 5660); MACHINE THREAD BUSHINGS AND PLUGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AGCW | WIRE DIAMETER | 0.023 INCHES MINIMUM AND 0.024 INCHES MAXIMUM |
| AGCW | WIRE DIAMETER | 0.023 INCHES MINIMUM AND 0.024 INCHES MAXIMUM |
| ABNM | THICKNESS | 0.063 INCHES NOMINAL |
| AKSX | MESH SIZE | 8.0 |
| ABGL | WIDTH | 5.313 INCHES NOMINAL |
| ABRY | LENGTH | 14.125 INCHES NOMINAL |
| CRXW | FILTERING MEDIA DESIGN | MESH |
| MATT | MATERIAL | STEEL |
| SFTT | SURFACE TREATMENT | ZINC |
| STYL | STYLE DESIGNATOR | RECTANGULAR W/ OR W/O MTG HOLES (INCL SQUARE)(BASICALLY FLAT) |
| AGAV | END ITEM IDENTIFICATION | ENGINE,DIESEL |
| ABTH | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES | 6.625 INCHES NOMINAL |