Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 18954 | KORODY-COLYER CORP A CR INDUSTRIES C |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| ATPC | STEP QUANTITY | 7 |
| AMDL | FIRST END DIAMETER | 1.0000 INCHES NOMINAL |
| AAHP | SECOND END STYLE | EXTERNAL THREADED |
| ABHP | OVERALL LENGTH | 6.750 INCHES NOMINAL |
| AMDM | FIRST END SPLINE LENGTH | 2.438 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | SPLINED (STRAIGHT) |
| AGAV | END ITEM IDENTIFICATION | GENERAL MOTORS CORP,DETROIT DIESEL ENGINE SERIES 71 |
| MATT | MATERIAL | STEEL |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 1.0000 INCHES NOMINAL |
| BDSQ | FIRST END SPLINE QUANTITY | 12 |
| CSPY | LARGEST STEP DIAMETER | 1.375 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 1.1880 INCHES NOMINAL |
| AMDN | FIRST END SPLINE MINOR DIAMETER | 0.9060 INCHES NOMINAL |
| AMHA | SECOND END EXTERNAL THREAD LENGTH | 0.562 INCHES NOMINAL |