Part Number
Part Number:
NSN:
NIIN:
Item Name:
SPACER , PLATE
Definition:
A FLAT METAL OR PLASTIC ITEM OF VARIOUS PERIPHERAL SHAPES HAVING A SOLID (NOT LAMINATED) CROSS-SECTION. IT IS DESIGNED TO MAINTAIN A PREDETERMINED DISTANCE BETWEEN TWO SURFACES. FOR ROUND ITEMS WITHOUT A HOLE HAVING A SOLID RECTANGULAR CROSS-SECTION USE DISK, SOLID, PLAIN. FOR ROUND OR HEXAGONAL ITEMS WITH ONLY ONE HOLE CENTRALLY LOCATED AND WITH THE LENGTH (THICKNESS) EXCEEDING 25 PERCENT OF THE OUTSIDE DIAMETER OR DISTANCE ACROSS PERIPHERAL FLATS, SEE SPACER, SLEEVE. THE THICKNESS BETWEEN THE TWO PARALLEL BEARING SURFACES MUST BE 0.006 INCH, (0.152 MM) OR MORE FOR ITEMS LESS THAN 1/4 INCH (6.35 MM) ACROSS THE PERIPHERAL DIAMETER, OR SMALLEST OVERALL OUTSIDE DIMENSION, OR MUST BE 0.016 INCH (0.406 MM) OR MORE FOR ITEMS 1/4 INCH (6.35 MM) OR GREATER ACROSS THE PERIPHERAL DIAMETER OR SMALLEST OVERALL OUTSIDE DIMENSION. FOR ITEMS WITH A THICKNESS LESS THAN THOSE INDICATED ABOVE, SEE SHIM. FOR ITEMS WITH ONE HOLE CENTRALLY LOCATED CONFORMING TO THE ABOVE DIMENSIONAL CRITERIA USE WASHER, FLAT OR SPACER, RING AS APPLICABLE. WHEN THICKNESS AND/OR OUTSIDE DIAMETER OR SMALLEST OVERALL OUTSIDE DIMENSION IS DESIGNATED AS A TOLERANCE/DIMENSION THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE. EXCLUDES GASKET; INSULATOR (AS MODIFIED) AND MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
CAGE Information
| Code |
Company |
| 84955 |
KAMAN AEROSPACE CORPORATION DBA HELI |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| ABHP |
OVERALL LENGTH |
2.500 INCHES NOMINAL |
| ABVL |
APERTURE DIAMETER |
0.191 INCHES MINIMUM AND 0.198 INCHES MAXIMUM |
| ZZZV |
FSC APPLICATION DATA |
NHA PN K631401 |
| AGAV |
END ITEM IDENTIFICATION |
SH-2F HELICOPTER |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/13T651 FED SPEC SINGLE MATERIAL RESPONSE |
| ADUM |
OVERALL THICKNESS |
0.071 INCHES NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
SPACER-HORIZONTAL STABILIZER |
| AAUB |
HOLE DIAMETER |
0.191 INCHES MINIMUM AND 0.198 INCHES MAXIMUM |
| MATT |
MATERIAL |
ALUMINUM ALLOY 7075 |
| ADVE |
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH |
0.380 INCHES NOMINAL |
| ABMK |
OVERALL WIDTH |
0.750 INCHES NOMINAL |
| ADUQ |
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH |
0.380 INCHES NOMINAL |
Similar Parts