Part Number
Definition:
AN ITEM CONSISTING OF INSULATING MATERIAL, WHICH IS SPECIFICALLY DESIGNED TO HAVE FASTENED THEREON, OR ON WHICH ARE FASTENED TERMINAL(S), SUCH AS SCREWS, SOLDER LUGS, SOLDER STUDS, SOLDERLESS CONNECTORS, CLIPS, AND THE LIKE. IT IS USUALLY USED FOR JUNCTIONS OR TERMINATIONS OF WIRE OR CABLE ASSEMBLIES. IT DOES NOT INCLUDE ITEMS AS DEFINED ABOVE WITH PARTS, SUCH AS RESISTORS AND CAPACITORS MOUNTED THEREON. DO NOT USE IF A MORE SPECIFIC NAME EXISTS, SUCH AS FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (AS MODIFIED); CONNECTOR (AS MODIFIED). EXCLUDES TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; AND CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. FOR ITEMS HAVING PRINTED ELECTRICAL CONDUCTOR PATHS, SEE PRINTED WIRING BOARD.
CAGE Information
| Code | Company |
|---|---|
| 24446 | GENERAL ELECTRIC CO |
Federal Supply Class
Title
LUGS, TERMINALS, AND TERMINAL ST
Inclusions:
INCLUDES BINDING POSTS; BATTERY CLIPS; STUD TERMINALS; TEST CLIPS.
Exclusions:
EXCLUDES CAPS, ELECTRICAL; CLIPS, ELECTRICAL; AND CONTACTS, ELECTRICAL.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABCX | BOARD CONSTRUCTION | SOLID CONSTRUCTION |
| ABCX | BOARD CONSTRUCTION | SOLID CONSTRUCTION |
| MATT | MATERIAL | PLASTIC BOARD |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| ABCU | DISTANCE BETWEEN TERMINAL ROW CENTERS | 0.781 INCHES |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | L-P-513,TYPE PBE FED SPEC SINGLE MATERIAL RESPONSE BOARD |
| CRNL | NONFEEDTHRU TERMINAL TYPE | 433 SINGLE |
| ABGN | BOARD OVERALL LENGTH | 3.375 INCHES |
| CWLG | TERMINAL PATTERN ARRANGEMENT | MULTI-ROW |
| ABCS | TERMINAL ROW QUANTITY | 3 |
| MARK | SPECIAL MARKINGS | R235,R234,C230,C231,E223 |
| ABDW | DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.438 INCHES |
| AAQL | BODY STYLE | STRIP TYPE |
| ABGT | BOARD THICKNESS | 0.094 INCHES |
| CWLN | TERMINAL DESIGN | NONFEEDTHRU |
| ABCT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.875 INCHES |
| AAMA | MOUNTING HOLE DIAMETER | 0.196 INCHES |
| MATT | MATERIAL | COPPER ALLOY TERMINALS |
| CSCS | NONFEEDTHRU TERMINAL QUANTITY | 7 SINGLE |
| ABDX | DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.188 INCHES |
| ABGP | BOARD OVERALL WIDTH | 2.000 INCHES |
| ABDV | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.000 INCHES |
| ABDU | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 3.000 INCHES |