Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 22852 | SPALLA INC |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAGZ | FIRST END STYLE | PLAIN |
| ABHP | OVERALL LENGTH | 4.160 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES |
| CSPY | LARGEST STEP DIAMETER | 0.686 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.6860 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 1046 OR STEEL COMP 1045 OR STEEL COMP 4140 |
| ATPC | STEP QUANTITY | 2 |
| AMHP | SECOND END INTERNAL THREAD LENGTH | 0.880 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | FIRST END HAS PARTIAL UNTHD CROSS DRILLED HOLE AND TWO NOTCHES;SECOND END HAS PARTIAL BORE |
| AMFZ | SECOND END DIAMETER | 0.5300 INCHES NOMINAL |
| AAHP | SECOND END STYLE | INTERNAL THREADED |