Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHAFT , SHOULDERED
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code |
Company |
| 22852 |
SPALLA INC |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| AAHN |
END SIMILARITY |
NOT IDENTICAL |
| AAHN |
END SIMILARITY |
NOT IDENTICAL |
| AAGZ |
FIRST END STYLE |
PLAIN |
| AMDL |
FIRST END DIAMETER |
0.9950 INCHES NOMINAL |
| AMFZ |
SECOND END DIAMETER |
0.9950 INCHES NOMINAL |
| AAHP |
SECOND END STYLE |
TONGUE ROUNDED ENDS |
| CSPY |
LARGEST STEP DIAMETER |
0.995 INCHES NOMINAL |
| AMFY |
SECOND END TONGUE WIDTH |
0.984 INCHES NOMINAL |
| AMFX |
SECOND END TONGUE THICKNESS |
0.547 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
3 GROOVES NEAR 1ST END EACH 0.2655 IN. DEEP;TAPERED HOLE 0.500 IN. WIDEST DIA DRILLED INTO SHAFT |
| CTBM |
SECOND END STEP LENGTH |
1.188 INCHES NOMINAL |
| ATPC |
STEP QUANTITY |
2 |
| MATT |
MATERIAL |
STEEL COMP 8620 |
| ABHP |
OVERALL LENGTH |
7.406 INCHES NOMINAL |
Similar Parts