Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE THREADED PORTION IS OF ONE NOMINAL DIAMETER, AND WHOSE UNTHREADED PORTION HAS BEEN MACHINED OR GROUND IN ONE OR MORE PLACES OR OVER ITS ENTIRE LENGTH TO A MAXIMUM DIAMETER LESS THAN THE MINIMUM PITCH DIAMETER OF THE THREAD (EXCLUDES UNDERCUT FOR THREAD RELIEF). IT IS NO. 0 (0.060 IN.) (1.5 MM) OR LARGER, AND IS DESIGNED TO BE HELD OR DRIVEN WITH EITHER A WRENCH OR INSERTED DRIVER (EXCLUDING INTERNAL SOCKET AND MULTIPLE SPLINE TYPES) OR BOTH IN SIZES BELOW NO. 10 (0.190 IN.) (5 MM) AND LARGER SIZES MUST HAVE A HEAD DESIGNED FOR ANY TYPE INSERTED DRIVER (EXCLUDING INTERNAL SOCKET AND MULTIPLE SPLINE TYPES) BUT MAY ALSO BE DESIGNED FOR EXTERNAL WRENCHING. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. SEE ALSO BOLT, EXTERNALLY RELIEVED BODY AND BOLT, INTERNAL WRENCHING.
CAGE Information
| Code | Company |
|---|---|
| 02750 | EATON AEROSPACE LLC DIV ELECTRICAL S |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAWC | FIRST DIAMETER FROM HEAD | 0.073 INCHES MINIMUM AND 0.083 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 303 OVERALL OR STEEL COMP 303 PLUS X OVERALL OR STEEL COMP 303CU OVERALL OR STEEL COMP 303MA OVERALL OR STEEL COMP 303SE OVERALL OR STEEL COMP 303PB OVERALL |
| AASL | HEAD DIAMETER | 0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM |
| CRTL | CRITICALITY CODE JUSTIFICATION | ZZZY |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AASA | THREAD LENGTH | 0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM |
| CSNG | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072-E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| ABQJ | POINT STYLE | FLAT |
| TEST | TEST DATA DOCUMENT | 81349-MIL-P-23199 SPECIFICATION |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASK | HEAD STYLE | OVAL COUNTERSUNK |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-W-52263 MIL SPEC ALL MATERIAL RESPONSES OVERALL OR ASTM A581 ASSN STD ALL MATERIAL RESPONSES OVERALL |
| AHYM | NOMINAL THREAD DIAMETER | 0.112 INCHES |
| AAWH | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.245 INCHES NOMINAL |
| SPCL | SPECIAL TEST FEATURES | SPECIAL QUALITY CONTROL TESTING |
| AASB | FASTENER LENGTH | 0.596 INCHES NOMINAL |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS |
| THSD | THREAD SERIES DESIGNATOR | UNC |
| AAJD | THREAD CLASS | 2A |
| CRSQ | COUNTERSINK ANGLE | 81.0 DEGREES MINIMUM AND 83.0 DEGREES MAXIMUM |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| CMLP | THREAD QUANTITY PER INCH | 40 |