Part Number
Definition:
A VALVE HAVING TWO OR MORE PORTS WITH VALVE STEM OR PILOT NEEDLE IN A NORMALLY OPEN OR CLOSED POSITION. IT IS SPECIFICALLY DESIGNED TO STOP OR START OR CHANGE THE FLOW OF FLUID BY MEANS OF THE MAGNETIC ACTION OF AN ELECTRIC COIL ON A MOVEABLE CORE OR PLUNGER. THE VALVE MAY BE EQUIPPED WITH A MANUAL OPENING OR CLOSING DEVICE. FOR ITEMS WITH THREE OR MORE PORTS THAT UTILIZE A RECIPROCATING SLIDE WITH RECESS AREAS WHICH MATE WITH PORTS IN AN INTEGRAL OR REPLACEABLE PORTED SLEEVE, SEE VALVE (1), LINEAR, DIRECTIONAL CONTROL. IT MAY BE INLINE OR CARTRIDGE (MANIFOLD) DESIGN. EXCLUDES VALVE (1), BUTTERFLY.
CAGE Information
| Code | Company |
|---|---|
| 02250 | SOUTH BEND CONTROLS INC |
Federal Supply Class
Title
VALVES, POWERED
Inclusions:
INCLUDES ELECTRIC MOTOR OPERATED VALVES; HYDRAULIC OPERATED VALVES; SOLENOID OPERATED VALVES.
Exclusions:
EXCLUDES ENGINE INTAKE AND EXHAUST VALVES (FSC 2990, 2815); VALVES SPECIFICALLY DESIGNED FOR USE WITH FIRE FIGHTING EQUIPMENT (FSC 4210); PLUMBING EQUIPMENT, AND THE LIKE (FSC 4540).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CWFD | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.500 INCHES 1ST END |
| CSBH | VOLTAGE IN VOLTS AND CURRENT TYPE | 30.0 DC |
| AQLR | VALVE OPERATION METHOD | SOLENOID |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY SOURCE CONTROLLED DWG FSCM 99207 PART NO. 3014T56P1 |
| CQRB | SEAT ANGLE | 12.0 DEGREES 1ST END |
| AAJD | THREAD CLASS | 3A 1ST END |
| CQGM | MAXIMUM OPERATING PRESSURE | 120.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| AWLS | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END |
| ADQU | FLOW CONTROL DEVICE | DISK |
| MEDA | MEDIA FOR WHICH DESIGNED | AIR SINGLE RESPONSE |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END |
| AHNC | CONNECTION STYLE | ERR-090 1ST END |
| ADSK | FLOW CONTROL DEVICE NORMAL OPERATION POSITION | OPEN |
| CMLP | THREAD QUANTITY PER INCH | 16 1ST END |
| CQJX | NOMINAL THREAD SIZE | 0.750 INCHES 1ST END |