Part Number
Part Number:
NSN:
NIIN:
Item Name:
RESISTOR , VARIABLE , NONWIRE WOUND ,
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OR MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code |
Company |
| 7A378 |
STATE ELECTRONICS PARTS CORP. |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| AEDX |
SHAFT STYLE |
ROUND |
| ABHP |
OVERALL LENGTH |
1.040 INCHES MINIMUM AND 1.196 INCHES MAXIMUM |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
200.0 OHMS ALL SECTIONS |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 TAB W/WIRE LEAD W/TAB |
| AEFK |
MAXIMUM STARTING TORQUE |
6.00 INCH-OUNCES |
| AAPN |
SECTION QUANTITY |
2 |
| AAQL |
BODY STYLE |
RECTANGULAR W/BUSHING |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 ALL SECTIONS |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
1.0 FREE AIR ALL SECTIONS |
| ADAQ |
BODY LENGTH |
0.921 INCHES MINIMUM AND 1.015 INCHES MAXIMUM |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A ALL SECTIONS |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-100.0/+100.0 ALL SECTIONS |
| ADAP |
MOUNTING BUSHING LENGTH |
0.375 INCHES NOMINAL |
| AXGY |
MOUNTING METHOD |
TAB |
| ABXF |
SHAFT LENGTH |
0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
Similar Parts