Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 61038 | VICKERS INC |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| FEAT | SPECIAL FEATURES | CENTER STEP HAS INVOLUTE SPLINES 4.485 IN. LG,30 DEG PRESSURE ANGLE,1.750 IN. PITCH DIA |
| AAHG | FIRST END GROOVE WIDTH | 0.0156 INCHES NOMINAL |
| AAHP | SECOND END STYLE | CIRCULAR GROOVED, SPLINED (STRAIGHT) AND EXTERNALLY THREADED |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMDL | FIRST END DIAMETER | 1.5750 INCHES NOMINAL |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES |
| AMFZ | SECOND END DIAMETER | 1.5750 INCHES NOMINAL |
| AAHH | FIRST END GROOVE DIAMETER | 1.5469 INCHES NOMINAL |
| AMHP | SECOND END INTERNAL THREAD LENGTH | 1.188 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | CIRCULAR GROOVED |
| AAHW | SECOND END GROOVE WIDTH | 0.0156 INCHES NOMINAL |
| MATT | MATERIAL | STEEL |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | 2.641 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 8.000 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 1.615 INCHES NOMINAL |
| AAHX | SECOND END GROOVE DIAMETER | 1.5469 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE 8620H OR 8720H SPECIAL QUALITY ASSN STD SINGLE MATERIAL RESPONSE |
| AMGA | SECOND END SPLINE LENGTH | 1.813 INCHES NOMINAL |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 1.5750 INCHES NOMINAL |
| AMCY | FIRST END DISTANCE FROM END TO GROOVE | 0.859 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 4 |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 1.3190 INCHES NOMINAL |
| BDSR | SECOND END SPLINE QUANTITY | 10 |