Part Number
Part Number:
NSN:
NIIN:
Item Name:
RESISTOR , VARIABLE , WIRE WOUND , NON
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OF MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code |
Company |
| 7A378 |
STATE ELECTRONICS PARTS CORP. |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| ADAU |
BODY HEIGHT |
0.625 INCHES NOMINAL |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
500.0 OHMS ALL SECTIONS |
| ADAT |
BODY WIDTH |
0.625 INCHES NOMINAL |
| AAPN |
SECTION QUANTITY |
3 |
| AJYN |
SCREW THREAD DIAMETER |
0.375 NOMINAL INCHES |
| ADAQ |
BODY LENGTH |
1.343 INCHES NOMINAL |
| AEDX |
SHAFT STYLE |
ROUND, FLATTED |
| ADAP |
MOUNTING BUSHING LENGTH |
0.250 INCHES NOMINAL |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| AAQL |
BODY STYLE |
RECTANGULAR BUSHING MOUNTED |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
2.0 FREE AIR ALL SECTIONS |
| ABXF |
SHAFT LENGTH |
0.875 INCHES NOMINAL |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 ALL SECTIONS |
| APXH |
TERMINAL LOCATION |
LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| AXGY |
MOUNTING METHOD |
STANDARD BUSHING |
| FEAT |
SPECIAL FEATURES |
70F SERIES POTENTIOMETER, 3-SECTION; CERMET, 500 OHM LINEAR TAPER WITH TYPE 1003/DPST SWITCH; 6 SOLDER-LUG TERMINALS; STANDARD MARKING WITH MFR P/N L23693 AND CATALOG REFERENCE AND DATE/LOT NUMBER |
| ABWV |
SHAFT DIAMETER |
0.250 INCHES NOMINAL |
Similar Parts