Part Number
Definition:
A STRAIGHT SHAFT HAVING TWO OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE OF 1 TO 125 MICROINCHES (O.O25 TO 3.2 MICROMETERS), ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE (S), KEYWAY(S), SPLINES, THREADS, OR HOLES. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE DRILLED FOR LUBRICATING HOLES. FOR ITEMS HAVING AN INTEGRAL GEAR(S) OR WORM(S), SEE GEARSHAFT (AS MODIFIED). FOR ITEMS DESIGNED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), STRAIGHT. FOR ITEMS NOT HAVING THE ABOVE CONDITIONS SEE PIN, STRAIGHT, HEADLESS. FOR ITEMS HAVING MACHINED ENDS WHICH CONSTITUTE STEPS SEE SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; AND BOLT, FLUID PASSAGE.
CAGE Information
| Code | Company |
|---|---|
| 36090 | LOCKHEED MARTIN LIBRASCOPE CORP |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| BDSR | SECOND END SPLINE QUANTITY | 14 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMFZ | SECOND END DIAMETER | 0.1873 INCHES NOMINAL |
| AAHG | FIRST END GROOVE WIDTH | 0.0170 INCHES NOMINAL |
| AMGA | SECOND END SPLINE LENGTH | 0.380 INCHES NOMINAL |
| AAHP | SECOND END STYLE | TWO CIRCULAR GROOVES AND SPLINED (STRAIGHT_) |
| AMHT | SECOND END DISTANCE BETWEEN FIRST AND SECOND GROOVE CENTERS | 0.2035 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | CIRCULAR GROOVED |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | 0.1230 INCHES NOMINAL |
| AAHW | SECOND END GROOVE WIDTH | 0.0300 INCHES NOMINAL |
| AMCY | FIRST END DISTANCE FROM END TO GROOVE | 0.215 INCHES NOMINAL |
| AAHH | FIRST END GROOVE DIAMETER | 0.1750 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.1873 INCHES NOMINAL |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 0.1873 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 2.140 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 416 |
| AAHX | SECOND END GROOVE DIAMETER | 0.1750 INCHES NOMINAL |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 0.1625 INCHES NOMINAL |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES |