Part Number
Definition:
A STRAIGHT SHAFT HAVING TWO OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE OF 1 TO 125 MICROINCHES (O.O25 TO 3.2 MICROMETERS), ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE (S), KEYWAY(S), SPLINES, THREADS, OR HOLES. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE DRILLED FOR LUBRICATING HOLES. FOR ITEMS HAVING AN INTEGRAL GEAR(S) OR WORM(S), SEE GEARSHAFT (AS MODIFIED). FOR ITEMS DESIGNED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), STRAIGHT. FOR ITEMS NOT HAVING THE ABOVE CONDITIONS SEE PIN, STRAIGHT, HEADLESS. FOR ITEMS HAVING MACHINED ENDS WHICH CONSTITUTE STEPS SEE SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; AND BOLT, FLUID PASSAGE.
CAGE Information
| Code | Company |
|---|---|
| 36090 | LOCKHEED MARTIN LIBRASCOPE CORP |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHP | SECOND END STYLE | CIRCULAR GROOVED |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| CSYM | SURFACE FINISH | 29.0 MICROINCHES |
| AAGZ | FIRST END STYLE | PLAIN |
| AAHX | SECOND END GROOVE DIAMETER | 0.1730 INCHES MINIMUM AND 0.1770 INCHES MAXIMUM |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | 0.130 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.195 INCHES MINIMUM AND 1.205 INCHES MAXIMUM |
| AMFZ | SECOND END DIAMETER | 0.1870 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 416 |
| AMDL | FIRST END DIAMETER | 0.1870 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD NO. 66 FED STD SINGLE MATERIAL RESPONSE |
| AAHW | SECOND END GROOVE WIDTH | 0.0180 INCHES MINIMUM AND 0.0200 INCHES MAXIMUM |