Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHAFT , SHOULDERED
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code |
Company |
| 36090 |
LOCKHEED MARTIN LIBRASCOPE CORP |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| AAGZ |
FIRST END STYLE |
PLAIN |
| FEAT |
SPECIAL FEATURES |
0.375 IN. SPLINE NO. 0.0344-16-2 ON MAIN BODY |
| CSYM |
SURFACE FINISH |
16.0 MICROINCHES |
| CSPY |
LARGEST STEP DIAMETER |
0.377 INCHES MINIMUM AND 0.379 INCHES MAXIMUM |
| AMDL |
FIRST END DIAMETER |
0.3090 INCHES MINIMUM AND 0.3100 INCHES MAXIMUM |
| ATPC |
STEP QUANTITY |
2 |
| MATT |
MATERIAL |
STEEL COMP 416 |
| ABHP |
OVERALL LENGTH |
30.900 INCHES NOMINAL |
| AAHN |
END SIMILARITY |
IDENTICAL |
Similar Parts