Part Number
Definition:
A STRAIGHT SHAFT HAVING TWO OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE OF 1 TO 125 MICROINCHES (O.O25 TO 3.2 MICROMETERS), ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE (S), KEYWAY(S), SPLINES, THREADS, OR HOLES. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE DRILLED FOR LUBRICATING HOLES. FOR ITEMS HAVING AN INTEGRAL GEAR(S) OR WORM(S), SEE GEARSHAFT (AS MODIFIED). FOR ITEMS DESIGNED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), STRAIGHT. FOR ITEMS NOT HAVING THE ABOVE CONDITIONS SEE PIN, STRAIGHT, HEADLESS. FOR ITEMS HAVING MACHINED ENDS WHICH CONSTITUTE STEPS SEE SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; AND BOLT, FLUID PASSAGE.
CAGE Information
| Code | Company |
|---|---|
| 36090 | LOCKHEED MARTIN LIBRASCOPE CORP |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 416 ASSN STD SINGLE MATERIAL RESPONSE |
| AMFZ | SECOND END DIAMETER | 0.1873 INCHES NOMINAL |
| AMHP | SECOND END INTERNAL THREAD LENGTH | 0.2800 INCHES NOMINAL |
| AAHP | SECOND END STYLE | CIRCULAR GROOVED AND INTERNALLY THREADED |
| AAHG | FIRST END GROOVE WIDTH | 0.0180 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | CIRCULAR GROOVED |
| AAHW | SECOND END GROOVE WIDTH | 0.0300 INCHES NOMINAL |
| AAHH | FIRST END GROOVE DIAMETER | 0.1750 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.1873 INCHES NOMINAL |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | 0.0850 INCHES NOMINAL |
| AMCY | FIRST END DISTANCE FROM END TO GROOVE | 0.1300 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 416 |
| AAHX | SECOND END GROOVE DIAMETER | 0.1600 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 1.716 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | SHAFT HAS EXT SERRATIONS,14 TEETH,0.1873 IN. OD,0.1750 IN. PITCH DIA,45 DEG PRESSURE ANGLE |