Part Number
Part Number:
NSN:
NIIN:
Item Name:
SYNCHRO , TRANSMITTER
Definition:
A SYNCHRO CONSISTING OF A STATOR AND ROTOR INDUCTIVELY COUPLED. THE ELECTRICAL OUTPUT OF THE STATOR INTO A RECEIVER SYNCHRO, A CONTROL TRANSFORMER OR DIFFERENTIAL SYNCHRO IS DEPENDENT UPON THE POSITION OF ITS ROTOR. DOES NOT INCLUDE VARIABLE RESISTORS, GONIOMETERS, VARIABLE TRANSFORMERS, OR ITEMS WITH DIALS.
CAGE Information
| Code | Company |
|---|---|
| 43999 | BOEING COMPANY THE DBA BOEING DIV DE |
Federal Supply Class
Title
SYNCHROS AND RESOLVERS
Inclusions:
Exclusions:
EXCLUDES SYNCHRO SYSTEMS; SERVO MECHANISMS.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AJSL | BODY SIZE | 11 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| CSFG | PLUS J ZSS REACTANCE IN OHMS | 1.40 NOMINAL |
| ABXF | SHAFT LENGTH | 0.5450 INCHES MINIMUM SINGLE SHAFT AND 0.5650 INCHES MAXIMUM SINGLE SHAFT |
| AJSY | ZSO RESISTANCE IN OHMS | 3.70 NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1870 INCHES MINIMUM SINGLE SHAFT AND 0.1872 INCHES MAXIMUM SINGLE SHAFT |
| CQTM | TERMINAL LOCATION | REAR |
| AJWR | SHOULDER LENGTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | 0.008 INCH-OUNCES MINIMUM |
| AAVL | PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.8250 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0970 INCHES MINIMUM AND 0.1030 INCHES MAXIMUM |
| AAQL | BODY STYLE | STANDARD ROUND C |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | 0.0008 INCHES |
| AJVF | PHASE SHIFT ANGLE IN DEG | 4.000 INPUT TO OUTPUT NOMINAL |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 1.1 WATTS NOMINAL |
| AJTC | ZSS RESISTANCE IN OHMS | 4.10 NOMINAL |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | 8.90 NOMINAL |
| CRSJ | SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| AJWH | SHAFT END PLAY | 0.0010 INCHES NOMINAL |
| CSJY | TRANSFORMATION RATIO | 0.454 ROTOR TO STATOR NOMINAL |
| ABKK | FLANGE DIAMETER | 1.0500 INCHES MINIMUM AND 1.0510 INCHES MAXIMUM |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 107.00 NOMINAL |
| AJTA | ZRS RESISTANCE IN OHMS | 22.00 NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.9290 INCHES MINIMUM AND 0.9410 INCHES MAXIMUM |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| ABKU | FLANGE THICKNESS | 0.0900 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM |
| AJVM | SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AAFZ | BODY MATERIAL | STEEL, CORROSION RESISTING |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.190 INCHES SINGLE SHAFT |
| AJWQ | PILOT LENGTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| CQWQ | SHAFT THREAD LENGTH | 0.2700 INCHES MAXIMUM SINGLE SHAFT |
| AHCG | MAXIMUM TEMP RISE | 20.0 DEG CELSIUS |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.2500 INCHES MAXIMUM |
| CRSY | ALIGNMENT HOLE DEPTH | 0.1250 INCHES MINIMUM |
| TTQY | TERMINAL TYPE AND QUANTITY | 1 CONNECTOR, PLUG |
| AAVH | SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8090 INCHES MINIMUM AND 0.8150 INCHES MAXIMUM |
| AKAN | SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| AJSW | ZRO RESISTANCE IN OHMS | 16.00 NOMINAL |
| AJST | ROTOR INPUT CURRENT RATING | 300.0 MILLIAMPERES MAXIMUM |
| AJWE | SHAFT RADIAL PLAY TEST POINT | 0.125 INCHES NOMINAL |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 18.10 NOMINAL |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |