Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE UNTHREADED PORTION IS OF A SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN-THOUSANDTHS (0.0015) OF AN INCH (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER, NOR IS IT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. FOR ITEMS HAVING CLOSE TOLERANCE, AND FABRICATED FROM MATERIAL HAVING 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH, SEE BOLT, SHEAR. FOR ITEMS FABRICATED FROM MATERIAL HAVING LESS THAN 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH AND NOT HAVING A CLOSE TOLERANCE, SEE BOLT, MACHINE.
CAGE Information
| Code | Company |
|---|---|
| 06725 | SPS TECHNOLOGIES LLC DBA AIR INDUSTR |
Federal Supply Class
Title
BOLTS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AASA | THREAD LENGTH | 1.024 INCHES MINIMUM AND 1.074 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.468 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 2.972 INCHES MINIMUM AND 3.002 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 3A |
| AHYM | NOMINAL THREAD DIAMETER | 0.875 INCHES |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CMLP | THREAD QUANTITY PER INCH | 14 |
| AATB | WIDTH BETWEEN FLATS | 1.239 INCHES MINIMUM AND 1.252 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 1.928 INCHES MINIMUM AND 1.948 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| CQFM | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM OVERALL AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| AASK | HEAD STYLE | DOUBLE HEXAGON |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AAUR | GRIP DIAMETER | 0.8735 INCHES MINIMUM AND 0.8740 INCHES MAXIMUM |