Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE UNTHREADED PORTION IS OF A SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN-THOUSANDTHS (0.0015) OF AN INCH (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER, NOR IS IT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. FOR ITEMS HAVING CLOSE TOLERANCE, AND FABRICATED FROM MATERIAL HAVING 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH, SEE BOLT, SHEAR. FOR ITEMS FABRICATED FROM MATERIAL HAVING LESS THAN 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH AND NOT HAVING A CLOSE TOLERANCE, SEE BOLT, MACHINE.
CAGE Information
| Code | Company |
|---|---|
| 43999 | BOEING COMPANY THE DBA BOEING DIV DE |
Federal Supply Class
Title
BOLTS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AASB | FASTENER LENGTH | 0.507 INCHES MINIMUM AND 0.537 INCHES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| ANEE | GRIP LENGTH | 0.125 INCHES NOMINAL |
| AAJD | THREAD CLASS | 3A |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AASA | THREAD LENGTH | 0.382 INCHES MINIMUM AND 0.412 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| CQBC | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| AATB | WIDTH BETWEEN FLATS | 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| CQFM | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM OVERALL AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| AASK | HEAD STYLE | DOUBLE HEXAGON |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AASU | HEAD HEIGHT | 0.164 INCHES NOMINAL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |