Part Number
Definition:
A SCREW, MACHINE OR SCREW, CAP, SOCKET HEAD WHOSE UNTHREADED PORTION IS OF SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001 IN.) (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS (1.000 IN.) (25 MM) OR LESS IN DIAMETER. ITEMS OVER (1.000 IN.) (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN THOUSANDTHS (0.0015 IN.) (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001 IN.) (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER. IT IS NOT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS.
CAGE Information
| Code | Company |
|---|---|
| 27624 | PAUL R. BRILES INC. DBA PB FASTENERS |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AASB | FASTENER LENGTH | 3.387 INCHES MINIMUM AND 3.417 INCHES MAXIMUM |
| AASA | THREAD LENGTH | 0.752 INCHES MINIMUM AND 0.802 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.625 INCHES |
| AASL | HEAD DIAMETER | 1.201 INCHES MINIMUM AND 1.272 INCHES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| AAJD | THREAD CLASS | 3A |
| AAUR | GRIP DIAMETER | 0.6235 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| CQBC | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| ANEE | GRIP LENGTH | 2.615 INCHES MINIMUM AND 2.635 INCHES MAXIMUM |