Part Number
Definition:
A SCREW, MACHINE OR SCREW, CAP, SOCKET HEAD WHOSE UNTHREADED PORTION IS OF SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001 IN.) (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS (1.000 IN.) (25 MM) OR LESS IN DIAMETER. ITEMS OVER (1.000 IN.) (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN THOUSANDTHS (0.0015 IN.) (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001 IN.) (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER. IT IS NOT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS.
CAGE Information
| Code | Company |
|---|---|
| 43999 | BOEING COMPANY THE DBA BOEING DIV DE |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AASL | HEAD DIAMETER | 0.578 INCHES MINIMUM AND 0.633 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.3271 INCHES MINIMUM AND 0.3276 INCHES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| FEAT | SPECIAL FEATURES | OVERSIZE GRIP DIA |
| AAJD | THREAD CLASS | 3A |
| AASB | FASTENER LENGTH | 1.202 INCHES MINIMUM AND 1.232 INCHES MAXIMUM |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AASA | THREAD LENGTH | 0.467 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| AHYM | NOMINAL THREAD DIAMETER | 0.312 INCHES |
| ANEE | GRIP LENGTH | 0.750 INCHES NOMINAL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |