Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHAFT ASSEMBLY , FLEXIBLE
Definition:
AN ITEM CONSISTING OF A CASING WITH FITTINGS AND ATTACHMENTS ON EACH END AND A SPIRALLY WOUND WIRE CORE WITH FORMED END(S) AND/OR CRIMPED ON END FITTINGS. IT IS DESIGNED TO TRANSMIT ROTARY MOTION AROUND BENDS FROM A MOTOR OR OTHER POWER SOURCE TO DRIVE VARIOUS TYPES OF EQUIPMENT, SUCH AS TACHOMETERS, SPEEDOMETERS, REMOTE CONTROLS, INSTRUMENTS, AND THE LIKE, WHICH ARE LOCATED AT AN ANGLE AND/OR DISTANCE FROM THE POWER SOURCE. SEE ALSO CONTROL ASSEMBLY, PUSH-PULL.
CAGE Information
| Code | Company |
|---|---|
| 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL D |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CFRM | TORSIONAL DEFLECTION RATING | 11 DEG FT-LB IN. |
| CFRM | TORSIONAL DEFLECTION RATING | 11 DEG FT-LB IN. |
| AECT | THREAD DEPTH | 0.580 INCHES MINIMUM FIRST END AND 0.600 INCHES MAXIMUM FIRST END |
| CFRQ | CASING OUTSIDE DIAMETER | 0.560 INCHES MAXIMUM |
| CFRZ | CORE OVERALL LENGTH | 10.970 INCHES MINIMUM AND 11.010 INCHES MAXIMUM |
| AKMH | CORE DIAMETER | 0.250 INCHES NOMINAL |
| BPPL | WRENCHING FACILITY TYPE | KNURLED SURFACE BOTH ENDS |
| AECT | THREAD DEPTH | 0.590 INCHES MINIMUM SECOND END AND 0.600 INCHES MAXIMUM SECOND END |
| CFQW | CROSS SECTION SIZE AND LOCATION | 0.310 INCHES ONE WASHER SWAGED TO SLEEVE ANY ACCEPTABLE SECOND END |
| AWZY | END CONNECTION TYPE | THREADED INTERNAL BOTH ENDS |
| ABUJ | THREAD SIZE (NON-CORE) | ERR-070 |
| ABHP | OVERALL LENGTH | 10.970 INCHES MINIMUM AND 11.010 INCHES MAXIMUM |
| APJC | THREAD LOCATION | INTERNAL BOTH ENDS |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNS BOTH ENDS |
| BJPS | CASING MATERIAL | STEEL |
| AAJD | THREAD CLASS | 3A BOTH ENDS |
| ADMS | WRENCHING FACILITY OUTSIDE DIAMETER | 1.100 INCHES MINIMUM SECOND END AND 1.110 INCHES MAXIMUM SECOND END |
| CFRN | CASING SURFACE TREATMENT | ZINC COATED OR CADMIUM |
| AJXJ | CORE MATERIAL | STEEL |
| BYDT | BEARING TYPE | SLEEVE BOTH ENDS |
| ZZZV | FSC APPLICATION DATA | WINDOW WIPER MK3,MOD 1,3 AND 4 |
| CFSM | STRENGTH RATING CHARACTERISTICS (NON-CORE) | 22.5 POUNDS TORSION STRENGTH WINDING DIRECTION |
| CFRT | SWIVEL END | NOT PROVIDED BOTH ENDS |
| ADMS | WRENCHING FACILITY OUTSIDE DIAMETER | 1.300 INCHES MINIMUM FIRST END AND 1.310 INCHES MAXIMUM FIRST END |
| CFQW | CROSS SECTION SIZE AND LOCATION | 0.309 INCHES FILTER HOUSING LEFT SIDE ANY ACCEPTABLE FIRST END |
| CFRW | END OVERALL DIAMETER | 1.100 INCHES MINIMUM SECOND END AND 1.110 INCHES MAXIMUM SECOND END |
| CFRW | END OVERALL DIAMETER | 1.300 INCHES MINIMUM FIRST END AND 1.310 INCHES MAXIMUM FIRST END |
| APTD | END TYPE | SQUARE MALE BOTH ENDS |
| AAJF | THREAD DIRECTION | RIGHT-HAND BOTH ENDS |
| AEDN | TIP LENGTH | 0.860 INCHES NOMINAL BOTH ENDS |
| CGDN | MINIMUM OPERATING RADIUS | 4.250 INCHES |
| BDRL | SETSCREW | NOT INCLUDED BOTH ENDS |
| CFRP | CASING LENGTH BETWEEN FERRULES | 7.150 INCHES NOMINAL |
| CFRY | LUBRICATION FITTING | NOT PROVIDED BOTH ENDS |
| CFSL | CORE REMOVABILITY | REMOVABLE |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE |