Part Number
Part Number:
NSN:
NIIN:
Item Name:
DUMMY CONNECTOR , RECEPTACLE
Definition:
AN ITEM SPECIFICALLY DESIGNED TO MATE WITH A PLUG CONNECTOR TO PERFORM ONE OR MORE SPECIAL FUNCTIONS, SUCH AS TO SUPPORT A PLUG CONNECTOR WHEN NOT IN USE, SHORT CONTACTS, OR OPEN OR CLOSE ELECTRICAL CIRCUITS, IN OR ON ANOTHER CONNECTOR. IT DOES NOT HAVE PROVISIONS FOR ATTACHING A WIRE, CABLE, OR CONTACT. IT IS DESIGNED TO MOUNT ON A PANEL, BULKHEAD, WALL, OR CHASSIS. IT DOES NOT INCLUDE CONNECTOR SHELLS WHICH ARE MERELY USED TO POSITION A PLUG CONNECTOR ON A PANEL.
CAGE Information
| Code | Company |
|---|---|
| 43999 | BOEING COMPANY THE DBA BOEING DIV DE |
Federal Supply Class
Title
CONNECTORS, ELECTRICAL
Inclusions:
INCLUDES PLUGS; JACKS; RECEPTACLES, ELECTRONIC COMPONENT SOCKETS AND ASSOCIATED ACCESSORIES
Exclusions:
EXCLUDES INTERCONNECTORS, FIBER OPTIC
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABFF | FURNISHED ITEMS (NON-CORE) | GASKET |
| AFQW | MATING END QUANTITY | 1 |
| AFQK | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.697 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 0.802 INCHES MINIMUM AND 0.837 INCHES MAXIMUM |
| CSWM | SHELL SURFACE TREATMENT | CADMIUM |
| AFRT | SHELL TYPE | SOLID |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.375 NOMINAL INCHES |
| CTBC | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-DTL-38999/9 GOVERNMENT SPECIFICATION |
| TEST | TEST DATA DOCUMENT | 81349-MIL-DTL-38999 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| ADZC | ENVIRONMENTAL PROTECTION | SALT WATER RESISTANT |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | 0.123 INCHES MINIMUM AND 0.138 INCHES MAXIMUM |
| AEBW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.375 INCHES NOMINAL |
| CSPT | SHELL MATERIAL | ALUMINUM ALLOY |
| ABMK | OVERALL WIDTH | 1.688 INCHES NOMINAL |
| AFRV | CONNECTOR LOCKING METHOD | BAYONET PIN |
| ABKW | OVERALL HEIGHT | 1.688 INCHES NOMINAL |