Part Number
Part Number:
NSN:
NIIN:
Item Name:
MOTOR , ALTERNATING CURRENT
Definition:
A MOTOR WHICH IS DESIGNED FOR OPERATION FROM AN ALTERNATING CURRENT SOURCE. SEE ALSO MOTOR, CONTROL.
CAGE Information
| Code | Company |
|---|---|
| 57712 | TELEMECHANICS INC |
Federal Supply Class
Title
MOTORS, ELECTRICAL
Inclusions:
Exclusions:
EXCLUDES STARTING MOTORS FOR ENGINES.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABWV | SHAFT DIAMETER | 0.3120 INCHES NOMINAL SINGLE END |
| AAUB | HOLE DIAMETER | 0.1900 INCHES NOMINAL SINGLE END |
| AXGY | MOUNTING METHOD | RESILIENT CRADLE |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 WIRE LEAD |
| CWFX | ROTOR SPEED RATING IN RPM | 3000.0 LOW FULL LOAD AND 3600.0 HIGH FULL LOAD |
| AAZQ | HOLE DEPTH | 0.3120 INCHES NOMINAL SINGLE END |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 2.125 INCHES |
| AAJV | OVERALL WIDTH | 5.000 INCHES |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 4 SLOT |
| BFMF | COOLING METHOD | AMBIENT AIR |
| FREQ | FREQUENCY IN HERTZ | 60.0 INPUT |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 2.125 INCHES |
| AAJU | OVERALL LENGTH | 6.250 INCHES |
| FAAZ | PHASE | SINGLE INPUT |
| CWCS | LENGTH OF SHAFT FROM HOUSING | 0.500 INCHES SINGLE END |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 2.500 INCHES SINGLE END |
| AKCT | SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE SINGLE END |
| AKPS | DUTY CYCLE | CONTINUOUS |
| AXCP | WINDING TYPE | INDUCTION-SINGLE VALUE CAPACITOR SPLIT PHASE |
| CWHZ | SHAFT END CHARACTERISTIC | A13 SINGLE STYLE SINGLE END |
| ANPZ | INCLOSURE FEATURE | OPEN PROTECTED |
| CNXS | POWER RATING | 0.0500 HORSEPOWER OUTPUT |
| AAJT | OVERALL HEIGHT | 5.500 INCHES |
| AJWZ | HOLE CENTER TO SHAFT END DISTANCE | 0.2500 INCHES NOMINAL SINGLE END |