Part Number
Part Number:
NSN:
NIIN:
Item Name:
MICROCIRCUIT , LINEAR
Definition:
A MICROCIRCUIT WHOSE OUTPUT IS A FUNCTION OF THE INPUT; THAT IS, THE OUTPUT VARIES IN A PREDETERMINED AND ESSENTIALLY PREDICTABLE MANNER FROM THE INPUT SIGNAL.
CAGE Information
| Code | Company |
|---|---|
| 16236 | DLA LAND AND MARITIME |
Federal Supply Class
Title
MICROCIRCUITS, ELECTRONIC
Inclusions:
INCLUDES INTEGRATED CIRCUIT DEVICES; INTEGRATED CIRCUIT MODULES, INTEGRATED ELECTRONIC DEVICES: HYBRID, MAGNETIC, MOLECULAR, OPTO-ELECTRONIC, AND THIN FILM.
Exclusions:
EXCLUDES SINGLE CIRCUIT ELEMENTS SUCH AS CAPACITORS; RESISTORS; DIODES AND TRANSISTORS; PRINTED CIRCUIT BOARDS AND CIRCUIT CARD ASSEMBLIES; AND FILTERS AND NETWORKS.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CQSZ | INCLOSURE CONFIGURATION | DUAL-IN-LINE |
| AFGA | OPERATING TEMP RANGE | -55.0/+125.0 DEG CELSIUS |
| FEAT | SPECIAL FEATURES | ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER COLUMBUS PRODUCTION STANDARD LO3853 |
| CRTL | CRITICALITY CODE JUSTIFICATION | ZZZY |
| CSSL | DESIGN FUNCTION AND QUANTITY | 2 SWITCH, ANALOG, SINGLE POLE SINGLE THROW NORMALLY OPEN |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AREFERENCE NUMBER DIFFERENTIATING MATERIAL WILL BE IN ACCORDANCE WITH NAVAL INVENTORY CONTROL POINT ACTIVITY HX QUALITY CONTROL. MANUFACTURING AND TESTING SPECIFICATIONS AVAILABLE AT THE DLA ICP |
| TTQY | TERMINAL TYPE AND QUANTITY | 14 PRINTED CIRCUIT |
| CBBL | FEATURES PROVIDED | LOW POWER AND MONOLITHIC AND HIGH FREQUENCY |
| AEHX | MAXIMUM POWER DISSIPATION RATING | 450.0 MILLIWATTS |
| ADAU | BODY HEIGHT | 0.140 INCHES MINIMUM AND 0.170 INCHES MAXIMUM |
| AFJQ | STORAGE TEMP RANGE | -65.0/+150.0 DEG CELSIUS |
| CQSJ | INCLOSURE MATERIAL | CERAMIC |
| ADAQ | BODY LENGTH | 0.753 INCHES MINIMUM AND 0.785 INCHES MAXIMUM |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | 44.0 VOLTS MAXIMUM POWER SOURCE |
| TEST | TEST DATA DOCUMENT | 96906-MIL-STD-883 STANDARD |
| ADAT | BODY WIDTH | 0.265 INCHES MINIMUM AND 0.285 INCHES MAXIMUM |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| CQZP | INPUT CIRCUIT PATTERN | DUAL 2 INPUT |