Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 53711 | NAVAL SEA SYSTEMS COMMAND |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAGZ | FIRST END STYLE | PLAIN |
| AAHP | SECOND END STYLE | EXTERNAL THREADED |
| AMFZ | SECOND END DIAMETER | 0.8075 INCHES MINIMUM AND 0.8125 INCHES MAXIMUM |
| AMHA | SECOND END EXTERNAL THREAD LENGTH | 1.1250 INCHES NOMINAL |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SPINDLE |
| ABHP | OVERALL LENGTH | 7.875 INCHES NOMINAL |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| CSPY | LARGEST STEP DIAMETER | 0.997 INCHES MINIMUM AND 1.000 INCHES MAXIMUM |
| AMDL | FIRST END DIAMETER | 0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | CPS DOOR LATCH: QA WATER TIGHT DOOR: LPT17 CLASS SHIP |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A276 NATIONAL SPEC SINGLE MATERIAL RESPONSE |
| ATPC | STEP QUANTITY | 5 |