Part Number
Part Number:
NSN:
NIIN:
Item Name:
BEAM , STRUCTURAL
Definition:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.
CAGE Information
| Code | Company |
|---|---|
| 98897 | LOCKHEED MARTIN CORPORATION DBA LOCK |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| BQJG | TOP FLANGE WIDTH | 0.750 INCHES NOMINAL |
| BQJG | TOP FLANGE WIDTH | 0.750 INCHES NOMINAL |
| BMPQ | RIGHT SIDE BOTTOM FLANGE THICKNESS | 0.063 INCHES NOMINAL |
| ABRY | LENGTH | 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM |
| HEAT | HEAT TREATMENT | T-3511 SOLUTION HEAT TREATED |
| AARN | FABRICATION METHOD | EXTRUDED |
| BPXN | WEB FLANGE THICKNESS | 0.063 INCHES NOMINAL |
| BRFD | WEIGHT PER UNIT MEASURE | 0.186 POUNDS PER LINEAR FOOT |
| MATL | MATERIAL | ALUMINUM ALLOY, QQ-A-200/3 |
| CSMZ | LEFT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| ABKW | OVERALL HEIGHT | 1.000 INCHES NOMINAL |
| BPXM | FILLET RADIUS WHERE BOTTOM RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.125 INCHES NOMINAL |
| CWKK | RIGHT BOTTOM INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| CMZY | FIRST TIP STYLE | LOWER RADIUS |
| BPXJ | FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG | 0.125 INCHES NOMINAL |
| ADXR | LEFT SIDE TOP FLANGE THICKNESS | 0.063 INCHES NOMINAL |
| CNQK | SECOND TIP STYLE | UPPER RADIUS |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | T3511 TEMPER |
| AJJB | FIRST TIP RADIUS | 0.063 INCHES NOMINAL |
| BQJH | BOTTOM FLANGE WIDTH | 0.750 INCHES NOMINAL |
| AGTA | BASIC SHAPE STYLE | Z SHAPE |
| CNQJ | SECOND TIP RELATIONSHIP TO FIRST TIP | NOT IDENTICAL |
| CMZZ | SECOND TIP RADIUS | 0.063 INCHES NOMINAL |