Part Number
Part Number:
NSN:
NIIN:
Item Name:
BEAM , STRUCTURAL
Definition:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.
CAGE Information
| Code | Company |
|---|---|
| 98897 | LOCKHEED MARTIN CORPORATION DBA LOCK |
Federal Supply Class
Title
STRUCTURAL SHAPES, NONFERROUS BA
Inclusions:
INCLUDES ANGLES; CHANNELS; TEES; ZEES.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABRY | LENGTH | 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM |
| AGTA | BASIC SHAPE STYLE | T SHAPE |
| ABKW | OVERALL HEIGHT | 1.584 INCHES MINIMUM AND 1.616 INCHES MAXIMUM |
| HEAT | HEAT TREATMENT | T-6 SOLUTION HEAT TREATED |
| CSMZ | LEFT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| AJJP | LEG THICKNESS | 0.058 INCHES MINIMUM AND 0.064 INCHES MAXIMUM |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | ALLOY 7075 AND TEMPER T6 |
| MATL | MATERIAL | ALUMINUM ALLOY AMS-QQ-A-200/11, ALLOY 7075 |
| CRZC | RIGHT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| BPXD | LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 0.800 INCHES NOMINAL |
| CNBB | THIRD TIP RADIUS | 0.030 INCHES NOMINAL |
| BPXL | FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.125 INCHES NOMINAL |
| BQJG | TOP FLANGE WIDTH | 1.584 INCHES MINIMUM AND 1.616 INCHES MAXIMUM |
| CNBD | FIRST TIP INNER RADIUS | 0.030 INCHES NOMINAL |
| BPXJ | FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG | 0.125 INCHES NOMINAL |
| ADXS | RIGHT SIDE TOP FLANGE THICKNESS | 0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM |
| CNQL | THIRD TIP RELATIONSHIP TO PRECEDING TIPS | NOT IDENTICAL |
| CNBJ | FIRST TIP OUTER RADIUS | 0.030 INCHES NOMINAL |
| CNQJ | SECOND TIP RELATIONSHIP TO FIRST TIP | IDENTICAL |
| AARN | FABRICATION METHOD | COLD ROLLED |
| BPXG | RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 0.800 INCHES NOMINAL |
| CNQM | THIRD TIP STYLE | FULL RADIUS |
| BRFD | WEIGHT PER UNIT MEASURE | 0.275 POUNDS PER SQUARE FOOT |
| CMZY | FIRST TIP STYLE | SQUARE W/ INNER AND OUTER CORNER RADII |
| ADXR | LEFT SIDE TOP FLANGE THICKNESS | 0.075 INCHES MINIMUM AND 0.087 INCHES MAXIMUM |