Part Number
Part Number:
NSN:
NIIN:
Item Name:
BEAM , STRUCTURAL
Definition:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.
CAGE Information
| Code | Company |
|---|---|
| 98897 | LOCKHEED MARTIN CORPORATION DBA LOCK |
Federal Supply Class
Title
STRUCTURAL SHAPES, NONFERROUS BA
Inclusions:
INCLUDES ANGLES; CHANNELS; TEES; ZEES.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ADXR | LEFT SIDE TOP FLANGE THICKNESS | 0.040 INCHES NOMINAL |
| ADXR | LEFT SIDE TOP FLANGE THICKNESS | 0.040 INCHES NOMINAL |
| CMZY | FIRST TIP STYLE | UPPER RADIUS |
| ABRY | LENGTH | 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM |
| AARN | FABRICATION METHOD | EXTRUDED |
| ADXS | RIGHT SIDE TOP FLANGE THICKNESS | 0.040 INCHES NOMINAL |
| BRFD | WEIGHT PER UNIT MEASURE | 0.050 POUNDS PER LINEAR FOOT |
| AGTA | BASIC SHAPE STYLE | T SHAPE |
| BPXL | FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.032 INCHES NOMINAL |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | T6511 TEMPER |
| HEAT | HEAT TREATMENT | T-6511 SOLUTION HEAT TREATED |
| CNQM | THIRD TIP STYLE | SQUARE END |
| CSMZ | LEFT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| BPXJ | FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG | 0.032 INCHES NOMINAL |
| BPXD | LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 0.270 INCHES NOMINAL |
| CRZC | RIGHT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| ABKW | OVERALL HEIGHT | 0.510 INCHES NOMINAL |
| MATL | MATERIAL | ALUMINUM ALLOY AMS-QQ-A-200/8, ALLOY 6061 |
| AJJB | FIRST TIP RADIUS | 0.032 INCHES NOMINAL |
| CNQL | THIRD TIP RELATIONSHIP TO PRECEDING TIPS | NOT IDENTICAL |
| AJJP | LEG THICKNESS | 0.040 INCHES NOMINAL |
| BPXG | RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 0.270 INCHES NOMINAL |
| CNQJ | SECOND TIP RELATIONSHIP TO FIRST TIP | IDENTICAL |
| BQJG | TOP FLANGE WIDTH | 0.540 INCHES NOMINAL |