Part Number
Part Number:
NSN:
NIIN:
Item Name:
BRACKET , ANGLE
Definition:
A RIDGE ITEM, USUALLY OF FLAT MATERIAL, FORMED INTO A DIHEDRAL ANGLE (GENERALLY A RIGHT ANGLE) WHICH MAY BE REINFORCED; IT IS DESIGNED TO POSITION, ALIGN, OR SUPPORT AN ITEM(S) IN RELATION TO ANOTHER. EXCLUDES BRACE (AS MODIFIED); BRACKET (1), MOUNTING; AND BRACKET, SHELF.
CAGE Information
| Code | Company |
|---|---|
| 98897 | LOCKHEED MARTIN CORPORATION DBA LOCK |
Federal Supply Class
Title
HARDWARE, COMMERCIAL
Inclusions:
INCLUDES ACCESS COVERS; BUMPERS; CASTERS; CABINET AND DOOR HARDWARE; CLEVISES; HINGES; LATCHES; STRAPS AND STRAPPING; TURNBUCKLES; WEBBED STRAPS.
Exclusions:
EXCLUDES WEAPONS SYSTEM HARDWARE (FSC 5342).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 T 301 MIL SPEC SINGLE MATERIAL RESPONSE |
| STYL | STYLE DESIGNATOR | ANGLE |
| ADLL | SECOND LEG LENGTH | 0.625 INCHES MINIMUM AND 0.745 INCHES MAXIMUM |
| HEAT | HEAT TREATMENT | FULL HARD |
| ADLK | FIRST LEG LENGTH | 0.625 INCHES MINIMUM AND 0.745 INCHES MAXIMUM |
| AHQN | FIRST LEG WIDTH | 0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| AHLF | SECOND LEG WIDTH | 0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AKBU | SECOND LEG STYLE | SQUARE AND TAPERED |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.150 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| AHLN | SECOND LEG HOLE DIAMETER | 0.218 INCHES MINIMUM AND 0.224 INCHES MAXIMUM |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SFTT | SURFACE TREATMENT | CADMIUM AND CHROMATE |
| AHLH | SECOND LEG END WIDTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AHLK | FIRST LEG HOLE DIAMETER | 0.135 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| AJZU | FIRST LEG STYLE | SQUARE AND TAPERED |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| MATT | MATERIAL | STEEL COMP 301 |
| AHPX | SECOND LEG THICKNESS | 0.040 INCHES NOMINAL |
| AHPW | FIRST LEG THICKNESS | 0.040 INCHES NOMINAL |
| AHQQ | FIRST LEG END WIDTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |