Part Number
Part Number:
NSN:
NIIN:
Item Name:
BEAM , STRUCTURAL
Definition:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.
CAGE Information
| Code | Company |
|---|---|
| 98897 | LOCKHEED MARTIN CORPORATION DBA LOCK |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AARN | FABRICATION METHOD | EXTRUDED |
| AARN | FABRICATION METHOD | EXTRUDED |
| AGTA | BASIC SHAPE STYLE | T SHAPE |
| BPXD | LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 0.750 NOMINAL INCHES |
| MATL | MATERIAL | ALUMINUM ALLOY,QQ-A-200/11,ALLOY 7075 |
| AJJB | FIRST TIP RADIUS | 0.131 INCHES NOMINAL |
| CNQM | THIRD TIP STYLE | SQUARE END |
| CSMZ | LEFT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| ABKW | OVERALL HEIGHT | 1.000 INCHES NOMINAL |
| BRFD | WEIGHT PER UNIT MEASURE | 0.191 POUNDS PER LINEAR FOOT |
| BPXG | RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 0.750 NOMINAL INCHES |
| CRZC | RIGHT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| BQJG | TOP FLANGE WIDTH | 1.500 INCHES NOMINAL |
| HEAT | HEAT TREATMENT | T-1 SOLUTION HEAT TREATED AND ARTIFICALLY AGED |
| BPXL | FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.125 NOMINAL INCHES |
| CMZY | FIRST TIP STYLE | LOWER RADIUS |
| ADXS | RIGHT SIDE TOP FLANGE THICKNESS | 0.065 INCHES NOMINAL |
| BPXJ | FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG | 0.125 NOMINAL INCHES |
| AJJP | LEG THICKNESS | 0.065 NOMINAL INCHES |
| ADXR | LEFT SIDE TOP FLANGE THICKNESS | 0.065 INCHES NOMINAL |
| CNQL | THIRD TIP RELATIONSHIP TO PRECEDING TIPS | NOT IDENTICAL |
| CNQJ | SECOND TIP RELATIONSHIP TO FIRST TIP | IDENTICAL |